| General specifications |
| Switching function | Normally closed (NC) |
| Output type | NAMUR |
| Slot width | 3.5 mm |
| Depth of immersion (lateral) | 5 ... 7 typ. 6 mm |
| Installation | |
| Output type | 2-wire |
| Nominal ratings |
| Nominal voltage | 8 V |
| Operating voltage | 5 ... 25 V |
| Switching frequency | 0 ... 500 Hz |
| Hysteresis | 0.41 ... 0.8 |
| Suitable for 2:1 technology | yes , Reverse polarity protection diode not required |
| Current consumption | |
| Measuring plate not detected | &ge, 3 mA at nominal voltage |
| Measuring plate detected | &le, 1 mA at nominal voltage |
| Functional safety related parameters |
| MTTFd | 13520 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Compliance with standards and directives |
| Standard conformity | |
| NAMUR | EN 60947-5-6:2000
IEC 60947-5-6:1999 |
| Standards | EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012 |
| Approvals and certificates |
| UL approval | cULus Listed, General Purpose |
| CSA approval | cCSAus Listed, General Purpose |
| Ambient conditions |
| Ambient temperature | -25 ... 100 °C (-13 ... 212 °F) |
| Mechanical specifications |
| Connection type | flexible leads LiY , 220 mm
with connector sleeves , 7 mm |
| Core cross-section | 0.14 mm2 |
| Housing material | PBT/PPS |
| Degree of protection | IP67 |
| Equipment protection level Gb |
| CE marking | [*PD-Z02585A*] |
| ATEX marking | II 2G Ex ia IIC T6&hellip,T1 Gb
The Ex-related marking can also be printed on the enclosed label. |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection Intrinsic safety
Use is restricted to the following stated conditions |
| Appropriate type | SJ3,5-...-N... |
| Effective internal capacitance | max. 50 nF , a cable length of 10 m is considered. |
| Effective internal inductance | max. 250 µ,H , a cable length of 10 m is considered. |
| Maximum permissible ambient temperature | Details of the correlation between the type of circuit connected, the maximum permissible ambient temperature, the temperature class, and the effective internal reactance values can be found on the EU-type examination certificate. |
| Equipment protection level Da |
| CE marking | [*PD-Z02585A*] |
| ATEX marking | II 1D Ex ia IIIC T135°C Da
The Ex-related marking can also be printed on the enclosed label. |
| Standards | EN 60079-0:2012+A11:2013, EN 60079-11:2012
Ignition protection Intrinsic safety
Use is restricted to the following stated conditions |
| Appropriate type | SJ3,5-...-N... |
| Effective internal capacitance | max. 50 µ,F
A cable length of 10 m is considered. |
| Effective internal inductance | max. 250 µ,H
A cable length of 10 m is considered. |
| General information |
| Use in the hazardous area | see instruction manuals |
| Category | 2G |
