| 1 bar | 20 psi | 0.1 MPa |
| Accuracy/Inaccuracy |
|---|
| Switch Point Accuracy [% of Range] | <± 0 .5 |
| Repeatability [% of range] | <± 0.1, (at temperature changes <10 K) |
| Specification Deviation [% of Range] | <± 0.25 (BFSL) / <± 0.5 (LS), (BFSL = Best Fit Straight Line, LS = Limit Setting values) |
| Hysteresis deviation [% of span] | <± 0.25 |
| Long-term stability [% of span] | <± 0.05, (for 6 months) |
| Zero point temperature coefficient [% of span / 10 K] | 0.2, (-25…80 °C) |
| Temperature coefficient range [% of span / 10 K] | 0.2, (-25…80 °C) |
| Response time |
|---|
| Response time [ms] | <3 |
| Programmable delay time dS, dr [s] | 0…50 |
Software / Programmers control
| Parameter selection | hysteresis/window, normally open/normally closed, switching logic, on/off delay, damping, display |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission method | COM2 (38.4 kBaud) |
| IO-Link test | 1.1 |
| SDCI standard | IEC 61131-9 |
| IO-Link device ID | 400 d / 00 01 90 h |
| Profiles | Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis |
| SIO mode | yes |
| Desired port type | A |
| Analog operating data | 1 |
| Binary operating data | 2 |
| Minimum operating cycle time [ms] | 2,3 |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…80 |
| Storage temperature [°C] | -40…100 |
| Degree of protection | IP 65, IP 67 |
| Tests / approvals |
|---|
| EMC | | DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Impact resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10…2000 Hz) |
|
| MTTF [years] | 201.44 |
| Certificate UL | | UL registration number | J003 |
|
| Pressure Equipment Directive | Chorus Good engineering practice, can be used for fluid group 2, fluid group 1 on request |
| Mechanical data |
|---|
| Weight [ g] | 231 |
| Material | 1.4542 (17-4 PH / 630), stainless steel steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC environment | 1.4542 (17-4 PH / 630) |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 25…35, (recommended tightening torque, V depending on lubrication, sealing and pressure rating) |
| Process connection | G 1/4 female thread |
| Displays / Controls |
|---|
| Display | | Display | 3 x LED, green (bar, psi, MPa) | | Output status | 2 x LED, yellow | | Measured values | alphanumeric display, red/green 4-digit |
|
| Notes |
|---|
| Packing quantity | 1 piece |
| Electrical connection |
|---|
| Connection | Connector: 1 x M12, Contacts: gold-plated |
