IFM PN7093

Application
Measuring element	Ceramic capacitive pressure cell
Application	For general industrial applications
Media	Liquid or gaseous media
Conditionally suitable for	Application in gaseous media pressure limited to 25 bar.
Measured medium temperature [°C]	-25…80
Pressure strength	150 bar 2175 psi 15 MPa
Min. burst pressure	350 bar 5075 psi 35 MPa
Pressure Type	Relative Pressure
Electronic Data
Operating voltage [V]	18…30 DC, (according to EN 50178 SELV/PELV)
Current consumption [mA]	<35
Min. insulation resistance [M?]	100, (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	<0, 3
Built-in watchdog	yes
Inputs/outputs
Number of inputs and outputs	Number of digital outputs: 2
Outputs
Total number of outputs	2
Output signal	Switching signal, IO-Link, (configurable)
Electrical version	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed, (parameterizable)
Max. voltage drop DC switching output [V]	2.5
DC switching output load current DC [mA]	150, (200 (…60 °C) 250 (…40 °C))
DC switching frequency [Hz]	<170
Short-circuit protection	yes
Short-circuit protection type	clocked	td>
Overcurrent protection	yes
Measuring/setting range
Measuring range	0…25 bar 0…363 psi 0…2.5 MPa
Switching point SP tbody>
0.2…25 bar	4…362 psi	0.02…2.5 MPa

Reset point rP

0.1…24.9 bar

2…360 psi

0.01…2.49 MPa

Increments

0.1 bar

2 psi

0, 01 MPa

Accuracy/UncertaintySwitch Point Accuracy [% of Range]<± 0.5Repeatability [% of range]<± 0.1, (for temperature changes <10 K)Deviation of specification [% of range]<± 0.25 (BFSL) / <± 0.5 (LS), (BFSL = best fit straight line, LS = Limit value setting)Hysteresis deviation [% of span]<± 0.25 Long-term stability [% of span]<± 0.05, (over 6 months)Zero point temperature coefficient [% of span / 10 K ]0.2, (-25…80 °C)Temperature coefficient range [% of measuring range / 10 K]0.2, (-25…80 °C)Response timeResponse time [ms]<3Programmable delay time dS, dr [s]0…50Software / ProgrammingParameter selectionHysteresis /window, normally open/normally closed, switching logic, on/off delay, Damping, DisplayInterfaces Communication interfaceIO-LinkTransmission methodCOM2 (38.4 kBaud) IO-Link test1.1SDCI standardIEC 61131-9IO-Link device ID402 d / 00 01 92 hProfiles Smart Sensor: Process Data Variable, Device Identification, Device DiagnosisSIO Modeyes Desired port typeAAnalog operating data1Binary operating data2Min. cycle time [ms]2.3Operating conditionsAmbient temperature [°C]-25…80Storage temperature [°C]-40… 100Degree of protectionIP 65, IP 67Tests / approvals EMC

DIN EN 61000-6-2
DIN EN 61000-6-3

Shock resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10…2000 Hz)

MTTF [years]224.01UL Certification

UL Registration Number

J001

Y pressure equipment directiveGood engineering practice, can be used for fluid group 2, fluid group 1 on requestMechanical data Weight [g]233.5Materialstainless steel steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC mediumstainless steel steel (1.4404 / 316L), ceramic, FKMMin. pressure cycles100 millionTightening torque [Nm]25…35, (recommended tightening torque, V depending on lubrication, sealing and pressure rating)Process connectionG 1/4 female threadDisplays / ControlsDisplay

Display	3 x LED, green (bar, psi, MPa)
Output status	2 x LED, yellow
Measured values	alphanumeric display, red/green 4-digit

NotesPacking quantity1 pieceElectrical connectionConnectionConnector: 1 x M12, Contacts: gold-plated