Application |
---|
Measuring element | Ceramic capacitive pressure cell |
Application | For general industrial applications |
Media | Liquid or gaseous media |
Measured medium temperature [°C] | -25…80 |
Pressure strength | |
Min. burst pressure | |
Pressure Type | Relative Pressure |
Electronic Data th> |
---|
Operating voltage [V] | 18…30 DC, (according to EN 50178 SELV/PELV) |
Current consumption [mA] | <35 |
Min. insulation resistance [M?] | 100, (500 V DC) |
Protection class | III |
Reverse polarity protection | yes |
Power-on delay time [s] | <0, 3 |
Built-in watchdog | yes |
Inputs/outputs |
---|
Number of inputs and outputs | Number of digital outputs: 2 |
Outputs |
---|
Total number of outputs | 2 |
Output signal | Switching signal, IO-Link, (configurable) |
Electrical version | PNP/NPN |
Number of digital outputs | 2 td> |
Output function | normally open / normally closed, (parameterizable) |
Max. voltage drop DC switching output [V] | 2.5 |
DC switching output load current DC [mA] | 150, (200 (…60 °C) 250 (…40 °C)) |
DC switching frequency [Hz] | <170 |
Short-circuit protection | yes |
Short-circuit protection type | clocked | td> |
Overcurrent protection | yes |
Measuring/setting range |
---|
Measuring range | -1…10 bar | -14.5…145 psi | -0.1…1 MPa |
|
Switching point SP | |
-0.9…10 bar | -13.5…145 psi | -0.09…1 MPa td> |
Reset point rP | -0.95…9.95 bar | -14…144.5 psi | -0.095…0.995 MPa |
|
In increments | 0.05 bar | 0, 5 psi | 0.00 5 MPa |
|
Precision/error switching points [% of span] | <± 0.5 |
---|
Repeatability [% of span] | <± 0.1, (at temperature changes <10 K) |
Deviation from curve [% of span] | <± 0.25 (BFSL) / <± 0.5 (LS), (BFSL = Best Fit Straight Line, LS = Set Limit) |
Hysteresis deviation [% of span] | <± 0.25 |
Long-term stability [% of range] | <± 0.05, (for 6 months) |
Zero point temperature coefficient [% of measuring range / 10 K] | 0.2, (-25…80 °C) |
Temperature coefficient span [% of span / 10 K] | 0.2, (-25…80 °C) |
Response time |
---|
Response time [ms] | <3 |
Programmable delay time dS, dr [s] | 0…50 |
Software Software / Programming |
---|
Parameter Selection | Hysteresis / Window, Normally Open / Normally Closed, Switching Logic, On / Off Delay, Damping, Display td> |
Interfaces |
---|
Communication interface | IO-Link |
Transmission method | COM2 (38.4 kBaud) |
IO-Link test | 1.1 |
SDCI Standard | IEC 61131-9 |
IO-Link Device ID | 403 d / 00 01 93 h |
Profiles | Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis |
SIO mode | yes |
Desired port type | A |
Analog operating data | 1 |
Binary operating data | 2 |
Min. cycle time [ms] | 2.3 |
Operating conditions |
---|
Ambient temperature [°C] | -25…80 |
Storage temperature [°C] | -40…100 |
Degree of protection | IP 65, IP 67 |
Tests / approvals |
---|
EMC | DIN EN 61000-6-2 | | DIN EN 61000-6-3 | |
|
Impact resistance | DIN EN 60068-2-27 | 50 g (11 ms) |
|
Vibration resistance | DIN EN 60068-2-6 | 20 g (10…2000 Hz) |
|
MTTF [years] | 224.01 |
UL certified | UL Registration Number | J001 |
|
Equipment Directive under pressure | Good engineering practice, can be used for fluid group 2, fluid group 1 on request |
Mechanical data |
---|
Weight [g] | 234 |
Material | stainless steel steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC medium | stainless steel steel (1.4404 / 316L), ceramic, FKM |
Min. pressure cycles | 100 million |
Tightening torque [Nm] | 25…35, (recommended tightening torque, V depending on lubrication, sealing and pressure rating) |
Process connection | G 1/4 female thread |
Displays / Controls |
---|
Display | Display | 3 x LED, green (bar, psi, MPa) | Output status | 2 x LED, yellow | Measured values | alphanumeric display, red/green 4-digit |
|
Notes |
---|
Packing quantity | 1 piece |
Electrical connection th> |
---|
Connection | Connector: 1 x M12, Contacts: gold-plated |