Pepperl+Fuchs KFD0-CS-EX1.54-Y2 241590

Manufacturer

Pepperl+Fuchs

Name

KFD0-CS-EX1.54-Y2

Part number

241590

Country

Germany

Type

Repeater

Weight (g)

117

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It provides control and signal transfer for SMART compatible fire and smoke alarm transmitters inside hazardous areas. The typical application for the barrier is connection of a fire detector loop to a control panel through a System Sensor® translator device (typically an IST200). The fall time of the digital signal must be less than 50 s, the current in the hazardous area must be bigger than 1 mA. Since this isolator is loop-powered, use the technical data to verify that proper voltage is available to the field devices.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Analog input
Supply
Rated voltage	loop powered
Power dissipation	0.2 W
Control circuit
Connection	terminals 11+, 12-
Current	0 ... 20 mA
Transmission range	current: 1 ... 20 mA voltage: 0 ... 24 V
Field circuit
Connection	terminals 1+, 2-
Short-circuit current	&le, 65 mA
Transfer characteristics
Deviation
	After calibration	&le, 3.5 mA current loss at 20 mA load current
	Influence of ambient temperature	± 20 µ,A / K
Rise time/fall time	&le, 50 µ,s (load current &ge, 1 mA)
Galvanic isolation
Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Indicators/settings
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2006
Degree of protection	IEC 60529:2001
Protection against electrical shock	UL 61010-1
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Mass	approx. 100 g
Dimensions	20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-Type Examination Certificate	BAS 00 ATEX 7087
	Marking	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I (-20 °C &le, Tamb &le, 60 °C)
	Voltage	25.2 V
	Current	43 mA
	Power	271 mW
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Certificate	TÜV 99 ATEX 1499 X
	Marking	II 3G Ex nA II T4 [device in zone 2]
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	Control drawing	116-0129 (cFMus)
UL approval
	Control drawing	116-0348 (cULus)
IECEx approval	IECEx BAS 08.0079 IECEx BAS 10.0007X
	Approved for	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex nA II T4 Gc
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.