Pepperl+Fuchs HiD2072 121445

Manufacturer

Pepperl+Fuchs

Name

HiD2072

Part number

121445

Country

Germany

Type

Signal Converter

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It is a temperature converter that accepts inputs from resistance temperature detectors (RTD) or potentiometers from a hazardous area and converts them to an isolated analog current signal in the safe area. Input type, range, and error handling parameters are configurable by DIP switches and potentiometers. The outputs are isolated from the inputs and are referenced to the power supply common. This module mounts on a HiD Termination Board.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Analog input
Supply
Connection	SL1: 1a(-), 1b(-), 2a(+), 2b(+)
Rated voltage	20.4 ... 30 V DC bus powered via Termination Board
Rated current	30 mA at 24 V, 20 mA output (per channel)
Power dissipation	0.6 W at 24 V (per channel)
Input
Connection side	field side
Connection	SL2: 7a(+), 5a(-), 5b(+), 7b(-), 3a(+), 1a(-), 1b(+), 3b(-)
RTD	2-, 3- or 4-wire Pt100 acc. to DIN 43760
	Measuring current	max. 0.4 mA
	Measurement range	-200 ... 850 °C (-328 ... 1562 °F)
	Span limits	40 ... 850 °C (104 ... 1562 °F)
	Zero suppression	± 500 % of span
Potentiometer	3-wire
	Measurement range	100 ... 300 &Omega, or 0.3 ... 100 k&Omega, with external shunt
Line fault detection	sensor burnout, upscale or downscale (selectable) (not on potentiometer and 4-wire RTD)
Output
Connection side	control side
Connection	SL1: 8a(+), 7a(-), 10a(+), 9a(-)
Load	0 ... 650 &Omega,
Output signal	4 ... 20 mA or 1 ... 5 V (on 250 &Omega,, 0.1 % internal shunt) Output signal is linear with temperature for Pt100.
Ripple	10 mVrms (at load 250 &Omega,)
Transfer characteristics
Accuracy	< ± 0.1 % of full-scale value (current output)
Influence of temperature	< ± 0.01 %/K on zero and span
Influence of load	< ± 0.1 % of full-scale value from 0 ... 650 &Omega,
Rise time/fall time	typ. 150 ms
Linearity	< ± 0.1 % of full-scale value (terminal based °C or °F input to mA out for Pt100)
Indicators/settings
Display elements	LED
Control elements	DIP-switch potentiometer
Configuration	via DIP switches via potentiometer
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2006 For further information see system description.
Degree of protection	IEC 60529
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Mass	approx. 140 g
Dimensions	18 x 106 x 128 mm (0.7 x 4.2 x 5 inch)
Mounting	on Termination Board
Data for application in connection with hazardous areas
EU-Type Examination Certificate	CESI 02 ATEX 086
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC
Certificate	PF 11 CERT 2109 X
	Marking	II 3G Ex nA IIC T4 Gc [device in zone 2]
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
CSA approval
	Control drawing	366-005CS-12B (cCSAus)
IECEx approval	IECEx TUN 04.0012
	Approved for	[Ex ia] IIC