Pepperl+Fuchs HiD2030 121495

Manufacturer

Pepperl+Fuchs

Name

HiD2030

Part number

121495

Country

Germany

Type

Transmitter Power Supply

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It provides a fully floating supply to power 2-wire SMART transmitters in the hazardous area, and repeats the current to drive a safe area load. It is also used with 2-wire current sources. Digital signals may be superimposed on the analog values in the hazardous or safe area, which are transferred bidirectionally. A separate fault output on the bus is signaled if the input signal is outside the range 0.2 mA ... 24 mA. The fault conditions can be monitored via a Fault Indication Board. This module mounts on a HiD Termination Board.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Analog input
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 2
Supply
Connection	SL1: 1a(-), 1b(-), 2a(+), 2b(+)
Rated voltage	20.4 ... 30 V DC bus powered via Termination Board
Rated current	60 mA at 24 V, 20 mA output (per channel)
Power dissipation	1.05 W at 24 V (per channel)
Input
Connection side	field side
Connection	SL2: 5a(+), 5b, 7a(-), 1a(+), 1b, 3b(-)
Input current	4 ... 20 mA , current limit 26 mA typ.
Input resistance	40 &Omega, , for current source
Ripple	10 mV eff
Voltage	min. 15.5 V at 20 mA
Communication	pass-through of HART signal to safe area The current sink terminals 4, 7 and 5, 6 do not pass the HART signal to safe area.
Output
Connection side	control side
Connection	SL1: 8a(+), 7a(-), 10a(+), 9a(-)
Load	0 ... 650 &Omega,
Output signal	4 ... 20 mA or 1 ... 5 V (on 250 &Omega,, 0.1 % internal shunt)
Ripple	10 mV eff on a load of 250 &Omega,
Response time	70 ms , 10 ... 90 % step change
Signal level	no fault: 1 mA ... 23.5 mA input current fault detection: 24 mA input current
Fault indication output
Connection	SL1: 6b
Output type	open collector transistor (common to both channels) fault bus signal, collective error message
Transfer characteristics
Calibrated accuracy	< ± 0.1 % of full-scale value (current output)
Influence of temperature	< ± 0.01 %/ K
Frequency range	communication channel: 0.5 ... 40 kHz within 3 db, (-6 db at 100 kHz), Tx to output and output to Tx, suitable for use with SMART transmitters using HART or similar protocol
Influence of load	< ± 0.1 % of full-scale value from 0 ... 650 &Omega,
Linearity	< ± 0.05 % of full-scale value
Indicators/settings
Display elements	LEDs
Control elements	DIP-switch
Configuration	via DIP switches
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2006 For further information see system description.
Degree of protection	IEC 60529
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Mass	approx. 140 g
Dimensions	18 x 106 x 128 mm (0.7 x 4.2 x 5 inch)
Mounting	on Termination Board
Data for application in connection with hazardous areas
EU-Type Examination Certificate	CESI 02 ATEX 086
	Marking	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC
Certificate	PF 11 CERT 2109 X
	Marking	II 3G Ex nA IIC T4 Gc [device in zone 2]
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
CSA approval
	Control drawing	366-005CS-12B (cCSAus)
IECEx approval	IECEx TUN 04.0012
	Approved for	[Ex ia] IIC