IFM SM6100

Manufacturer

IFM

Part number

SM6100

Country

Germany

Sale of any product from the IFM catalog at competitive prices

2technologie will help you choose and buy products and spare parts from IFM (official website: www.ifm.com). We sell only certified goods and give an official guarantee from the manufacturer IFM

This is flow meter with a measuring range of 0.2-50 l/min and totaliser function ensures high accuracy, repeatability and measurement dynamics. Thanks to the flat-seal process connection G 1/2, M12 connector and flexible programming via pushbuttons can be adapted to the respective application. Used for flow rate measurement of conductive media, e.g. coolants in welding equipment.

Worldwide delivery services

Ways of payment

< th colspan=2>Temperature control

Application

Sum function, for general industrial use

Installation

pipe connection with adapter

Medium

Conductive liquids, Water, water-based liquids

Medium note

Conductivity: ? 20 µS/cm

Viscosity: < 70 mm?/s (40 °C)

Measured medium temperature [°C]

-10…70

Pressure strength [bar]

16

MAWP (for use according to CRN) [bar]

17.7

Electronic data

Operating voltage [V]

18…30 DC, (according to EN 50178 SELV/PELV )

Current consumption [mA]

95, (24 V)

Min. insulation resistance [M?]

100, (500 V DC)

Protection class

III

Reverse polarity protection

yes

Power-on delay time [s]

5

Inputs/outputs

Number of inputs and outputs

Number of digital outputs: 2, Number of analog outputs: 1

Inputs

counter reset

Outputs

Total number of outputs

2

Output signal

switching signal, analog signal, pulse signal, IO-Link, (configurable)

Electrical version

PNP/NPN

Number of digital outputs

2

Output signal function

normally open / normally closed, (parameterizable)

Max. voltage drop DC switching output [V]

2

DC switching output load current [mA]

200

Number of analog outputs

1

Analog current output [mA]

4…20, (scalable)

Max. load [?]

500

Analog voltage output [V]

0…10, (scalable)

Min. load resistance [?]

2000

Pulse output

Flowmeter

Short-circuit protection

yes

Short-circuit protection type

clocked

Overcurrent protection

yes

Measurement/setting range

Range measurements

0.1…25 l/min

0.005…1.5 m?/h

Display range

-30…30 l /min

-1.8…1.8 m?/h

Resolution

0.02 l/min

0.002 m?/h

Setting point SP

0.25…25 l/min

0.015…1.5 m?/h

Reset point rP

< /tbody>

0.1…24.9 l/min

0.005…1.495 m?/h

Analog start point nala, ASP

0…20 l/min

0…1.2 m?/h

Analogue Endpoint, AEP

5 …25 l/min

0.3…1.5 m?/h

Step width

0.02 l/min

0.002 m?/h

Momentary flow control

Impulse value

0.00001…30 000 m?

Pulse length [s]

0.01…2

Temperature control

Measuring range [°C]

-20…80

Resolution [°C]

0.2

Setting point SP [°C]

-19, 2…80

Reset point rP [°C]

-19.6…79.6

Analog start point [°C]

-20…60

Analog end point [°C]

0 …80

In steps of [°C]

0.2

Accuracy/Uncertainty < /th>

Flow rate control

Accuracy (in measuring range)

± (0, 8% MW + 0.5% MEW)

Repeatability

± 0.2% MEW

Accuracy [K]

± 2.5 (Q > 1 l/min)

Response Time

Flow Rate Control

Response Time [s]

0.15, (dAP = 0)

Programmable delay time dS, dr [s]

0…50

Switching output damping dAP [s]

0…5

Temperature monitoring

Dynamics of response T05 / T09 [s]

T09 = 20 (Q > 1 l/min)

Software / Programming

Parameter selection

Flow rate control, flow meter, preset counter, Temperature control, hysteresis/window, normally open/normally closed, switching logic , current output/voltage output/pulse output, Start delay, display can be switched off, Display

Interfaces

Communication interface

IO-Link

Transmission method

COM2 (38.4 kBaud)

IO-Link test

1.1

SDCI standard

IEC 61131-9

IO-Link device ID

569 / 00 02 39 h

Profiles

Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis

SIO Mode

Yes

Desired port type

A

Analog operating data e

3

Binary operating data

2

Min. cycle time [ms]

5

Operating conditions

Ambient temperature [°C ]

-10…60

Storage temperature [°C]

-25…80

Degree of protection

IP 67

Tests / approvals

EMC

DIN EN 60947-5-9

Impact resistance

DIN IEC 68-2-27

20 g ( 11 ms)

Vibration resistance

DIN IEC 68-2-6

5 g (10…2000 Hz)

MTTF [years]

145

Pressure Equipment Directive

Good engineering practice, can use for fluid group 2, fluid group 1 on request

Mechanical data

Be with [g]

548

Material

stainless steel steel (1.4404 / 316L), PBT-GF20, PC, FKM, TPE medium

stainless steel steel (1.4404 / 316L), PEEK, EPDM

Process connection

G 1/2 DN15 threaded connection Flat seal

Displays / Controls

Display

Display	6 x LED, green (l/min, m?/h, l, m?, 10?, °C)
Output status	2 x LED, yellow
Measured values	alphanumeric display, 4 digits
programming	alphanumeric display, 4 digits

Notes< /th>

Notes

MW = Measured value

MEW = Upper limit of measuring range

Pack quantity

1 piece

electrical connection

Connection

Connector: 1 x M12, Contacts: gold-plated

Diagrams and Graphs

Pressure Loss

dP