| Application |
|---|
| Media | Liquid media, viscous media, powder |
| Do not use for | See operating instructions, chapter "Proper use" |
| Probe length [mm] | 11 |
| Reservoir pressure [bar] | -1…40, (MAWP (for use according to CRN): 40 bar / 4 MPa) |
| MAWP (for CRN application) [bar] | 40 |
| Oil |
|---|
| Measured medium temperature [°C] | -40…100 |
| Short-term medium temperature [°C] | -40…150, (1 h) |
| Water |
|---|
| Measured medium temperature [°C] | -40…100 |
| Short-term medium temperature [°C] | -40…150, (1 h) |
| Electronic data |
|---|
| Operating voltage [V] | 18…30 DC |
| Current consumption [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Ko Number of digital outputs: 2 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | Switching signal, IO-Link |
| Electrical version | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | OK open / normally closed, (parameterizable) |
| Max. voltage drop DC switching output [V] | 2.5 |
| DC switching output load current [mA] | 100 |
| Short-circuit protection | yes |
| Short-circuit protection type | clocked |
| Overcurrent protection | yes |
| Measurement/setting range |
|---|
| Factory setting | Low water environment |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission method | COM2 (38.4 kBaud) |
| IO-Link test | 1.1 |
| SDCI standard | IEC 61131-9 |
| IO-Link Device ID | 0x000132 |
| Profiles | Smart Sensor : Process Data Variable, Device Identification |
| SIO mode | Yes | | A |
| Analog operating data | 1 |
| Binary operating data | 2 |
| Minimum operating cycle time [ms] | 2.3 |
| Operating conditions |
|---|
| Ambient temperature [°C] | -40…85 |
| Ambient temperature note | | Measured medium temperature: < 100 °C | | -40…60 °C | | Measured medium temperature: < 150 °C |
|
| Storage temperature [°C] | -40…85 |
| Degree of protection | IP 68 , IP 69K |
| Tests / approvals |
|---|
| EMC | DIN EN 61000-6-2 | | DIN EN 61000-6-4 | : open tanks | | DIN EN 61000-6-3 | : closed tanks |
|
| Shock resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10…2000 Hz) |
|
| MTTF [years] | 223 |
| UL certificate | | Registration UL number | H001 |
|
| Mechanical data |
|---|
| Weight [g] | 211 |
| Material | stainless steel steel (1.4404 / 316L), PEEK, PEI, FKM medium | PEEK |
| Process connection | G 1/2 male thread |
| Ra/Rz surface characteristics of wetted parts | < 0.8 |
| Displays / Controls |
|---|
| Display | | Output status | LEDs, yellow | | Operating status | LEDs, green |
|
| Notes |
|---|
| Packing quantity | 1 piece |
| electrical connection |
|---|
| Connection | Connector: 1 x M12, Contacts: gold-plated |
