| Application |
|---|
| Media | liquid refrigerants, oils, oily media, Water, water-like media |
| Dielectric constant of the medium | ? 2, (for medium with a dielectric constant of 2 to 20 (e.g. oils), a coaxial pipe is required for operation) |
| It is forbidden to use lubricants for | , granulates, bulk solids, acids, alkalis, strongly foaming media |
| Measured medium temperature [°C] | 0…80, (90 < 1 h ) |
| Reservoir pressure [bar] | -1…16 |
| MAWP (for application according to CRN) [bar] | 25 |
| Electronic data |
|---|
| Operating voltage [V ] | 18…30 DC |
| Current consumption [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 2 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | Switching signal, IO-Link
| Electrical version | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed, (parameterizable) |
| Max. voltage drop DC switching output [V] | 2.5 |
| DC switching output load current [mA] | 200 |
| Short-circuit protection | yes |
| Short-circuit protection type | Temperature, synchronized |
| Measuring/setting range |
|---|
| Probe length L [mm] | 100 …1600 |
| Active range A [mm] | L-40 (L-60), (when adjusted for oil or oily media) |
| Inactive area I1 / I2 [mm] | 30 / 10 (30), (when adjusted for oil or oily media) |
| Parameter setting within |
|---|
| Switching point SP [mm] | ? 15 (35) / ? L-30 |
| Note on setting point SP | | when setting for oil or oil containing media | | | Reset point rP [mm] | ? 10 (30) / ? L-35 | | Note on reset point rP | | when setting for oil or oily fluids |
| | In increments of [mm] | 5 | | Hysteresis [mm] | > 5 | | Accuracy/Uncertainty |
|---|
| Repeatability [mm] | ± 5 | | Switch point error [mm] | ± (15 + 0.5 %), (% of measuring range limit: L - 30 mm) | | Interfaces |
|---|
| Communication interface | IO-Link | | Transmission method | COM2 (38.4 kBaud) | | IO- Link verification | 1.1 | | SDCI standard | IEC 61131-9 CDV | < td>IO-Link device ID| 008 d / 00 00 08 h | | Profiles | none | | SIO mode | yes | | Desired port type | A | | Analog operating data | 1 | | Binary operating data | 2 | | Min. cycle time [ms] | 2.3 | | Operating conditions< /th> |
|---|
| Ambient temperature [°C] | 0…60 | | Storage temperature [°C] | -25…80 | | Degree of protection | IP 67 | | Tests / Approvals |
|---|
| EMC | | | Impact resistance | | DIN IEC 68-2-27 | 50 g (11 ms) |
| | Vibration resistance | | DIN IEC 68-2-6 | 5 g (10…2000 Hz) |
| | MTTF [years] | 204.29 | | Mechanical data |
|---|
| Weight [g] | 388 | | Material | stainless steel steel (1.4301/304), FKM, PBT (polybutylene terephthalate), PC, PEI, TPE-V, PTFE (teflon) | | Body materials in contact with meas. medium | stainless steel steel (1.4305/303), sensor connection: stainless steel steel (1.4435 / 316L), PTFE (Teflon), FKM, Seal: NBR-PPTA 20 | | Process connection | G 3/4 external thread | | Displays / Controls |
|---|
| Display | < td>Display| 3 x LED, green | | Output status | 2 x LED, yellow | | Fill level | alphanumeric display, 4-digit | | parameterization | alphanumeric display, 4-digit |
| | Accessories |
|---|
| Accessories ( optional) | | Probe:, E43203…E43205 / E43207…E43210 | | Coaxial tube:, E43211 …E43221, E43223, E43224 |
| | Notes |
|---|
| Packing quantity | 1 piece | | Electrical connection |
|---|
| Connection | Connector: 1 x M12, Contacts: gold-plated |
|
