| Application |
|---|
| Media | liquid refrigerants, oils, oily media, Water, water-like media< /td> |
| Dielectric constant of medium | > 2 |
| Do not use for | strong conductive media, sticky media, granulates, bulk solids, acids, alkalis, hygienic media and electroplating |
| Max. level change rate [mm/s] | 100 |
| Reservoir pressure [bar] | 0.5, (when installed without mounting accessories: E43001 - E43007, E43019) |
| Coolants |
|---|
| Measured medium temperature [°C] | 0…35, (with climate tube E43100: 35…65 °C) |
| Oil |
|---|
< tr>Measured medium temperature [°C] | 0…70 | | Short-term medium temperature [°C] | 0…90, (< 1 h) |
| Water |
|---|
| Measured medium temperature [°C] | 0…35, (with climate tube E43100: 35…65 °C) |
| Electronic data |
|---|
| Operating voltage [V] | 18…30 DC |
| Current consumption [mA] | < 50 | < /tr>
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | < 3 |
| Inputs/outputs |
|---|
< tr>Col Number of inputs and outputs | Number of digital outputs: 2 | | Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | Switching signal, IO-Link |
| Electrical version | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed, (parameterizable) |
| Max. voltage drop DC switching output [V] | 2.5 |
| DC switching output load current [mA] | 200< /td> |
| Short-circuit protection | yes |
| Short-circuit protection type | Temperature, synchronized |
| Overcurrent protection | yes |
| Measurement/setting range< /th> |
|---|
| Factory setting | Liquid refrigerants, Water, water-like media |
| Probe length L [mm ] | 264 |
| Active range A [mm] | 195 |
| Inactive area I1 / I2 [mm] | 53 / 16 |
| Parameter setting within |
|---|
| Setting point SP [mm] | 25…200 |
| Reset point rP [mm] | 20…195 |
| In increments of [mm] | 5 |
| Original point OP [mm]< /td> | 69 - 82 - 94 - 106 - 118 - 130 - 143 - 155 - 167 - 179 - 191 - 204 - OFF |
| Hysteresis, OP [mm] | 2 |
| Accuracy/Uncertainty |
|---|
| Measuring error [% of final value] | ± 5 |
| Repeatability | ± 2 |
| Resolution [mm] | 5 |
| Software / Programming |
|---|
< tr>Parameter selection | hysteresis/window, normally open/normally closed, switching logic, SP/rP position, OP setting, media selection, offset setting, turn on/off delay | | Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission method | COM2 (38.4 kBaud) |
| IO-Link test | 1.1 |
| SDCI standard | IEC 61131-9 |
| IO-Link device ID | 0x00028C |
| Profiles | Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis |
| SIO Mode | Yes |
| Desired tee port | A |
| Analog operating data | 2 |
| Binary operating data | 2 |
| Minimum operating cycle time [ms] | 3.2 |
| Operating conditions |
|---|
| Ambient temperature [°C] | 0…60 |
| Storage temperature [°C] | -25…80 |
| Degree of protection | IP 67 | < /tr>
| Tests / Approvals |
|---|
| EMC | | DIN EN 61000- 6-2 | | | DIN EN 61000-6-4 | |
|
| Impact resistance | | DIN EN 60068-2-27 | < td>15 g (11 ms)
|
| Vibration resistance | < tbody>| DIN EN 60068-2-6 | 5 g (10…2000 Hz) | |
| MTTF [years] | 265 |
| Mechanical data |
|---|
< td>Weight [g]| 348.5 |
| Dimensions [mm] | O 16 |
| Material | stainless steel steel (1.4301/304), stainless steel steel (1.4404 / 316L), FKM, NBR, PBT (polybutylene terephthalate), PC, PA (polyamide), PP, TPV Environment | PP |
| Displays / Controls |
|---|
| Display | < table> |
