Pepperl+Fuchs HiDTB08-DVM-IDC4-SC-R1-SM32 255404

Manufacturer

Pepperl+Fuchs

Name

HiDTB08-DVM-IDC4-SC-R1-SM32

Part number

255404

Country

Germany

Type

Termination Board

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

The function of the Termination Board as well as the connector pin assignment exactly fit the requirement of DeltaV Traditional I/O systems. Information about missing supply voltage of the interface modules is available for the system as potential-free contact. Wiring errors from field will be reported via the same relay contact if the interface module supports this function. The Termination Boards are supplied with a robust glass fiber reinforced plastic housing as standard. This design permits the fast and reliable installation on 35 mm DIN mounting rail acc. to EN 60715 in the cabinet.

Worldwide delivery services

Ways of payment

Supply
Connection	X20: terminals 3, 5 (+), 4, 6 (-)
Nominal voltage	24 V DC , in consideration of rated voltage of used isolators
Voltage drop	0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple	&le, 10 %
Fusing	2 A , in each case for 8 modules
Power dissipation	&le, 500 mW , without modules
Reverse polarity protection	yes
Redundancy
Supply	Redundancy available. The supply for the isolators is decoupled, monitored and fused.
Fault indication output
Connection	X20: terminals 1, 2
Output type	volt-free contact
Contact loading	30 V DC , 1 A
Indicators/settings
Display elements	LEDs PWR ON (Termination Board power supply) - LED power supply I, green LED - LED power supply II, green LED LED FAULT (fault indication), red LED - LED lits: module failure - LED flashes: power supply failure
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2012 For further information see system description.
Degree of protection	IEC 60529:2001
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection	IP20
Connection
	Field side	explosion hazardous area: screw terminals , blue
	Control side	non-explosion hazardous area: IDC plug, 16-pin
	Supply	pluggable screw terminals , black
	Fault output	pluggable screw terminals , black
Core cross-section	screw terminals: 0.2 ... 2.5 mm2 (24 ... 12 AWG)
Material	housing: polycarbonate, 10 % glass fiber reinforced
Mass	approx. 600 g
Dimensions	150 x 200 x 163 mm (5.9 x 7.9 x 6.42 inch) , height including module assembly
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-Type Examination Certificate	CESI 11 ATEX 062
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Safe area
	Maximum safe voltage	250 V (Attention! Um is no rated voltage.)
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 50303:2000
International approvals
CSA approval
	Control drawing	see control drawing of correspoding modules
IECEx approval	IECEx CES 11.0022
	Approved for	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I