Pepperl+Fuchs Z040 240527

Manufacturer

Pepperl+Fuchs

Name

Z040

Part number

240527

Country

Germany

Type

Module

Weight (g)

150

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

The Zener Barrier prevents the transfer of unacceptably high energy from the safe area into the hazardous area. The zener diodes in the Zener Barrier are connected in the reverse direction. The breakdown voltage of the diodes is not exceeded in normal operation. If this voltage is exceeded, due to a fault in the safe area, the diodes start to conduct, causing the fuse to blow. The Zener Barrier has a positive polarity, i. e. the anodes of the zener diodes are grounded. Depending on the application, increased or decreased intrinsic safety parameters apply for serial or parallel connection. For the detailed parameters refer to the Zener Barrier certificate. Application examples can be found in the system description of the Zener Barriers.

Worldwide delivery services

Ways of payment

General specifications
Type	DC version, positive polarity
Electrical specifications
Nominal resistance	48.5 &Omega,
Series resistance	max. 50 &Omega,
Fuse rating	100 mA
Hazardous area connection
Connection	terminals 1, 2, 3, 4
Safe area connection
Connection	terminals 5, 6, 7, 8
Working voltage
	Supply loop	max. 5 V
	Measurement loop	max. 3 V at 10 µ,A (1 V at 1 µ,A)
Transfer characteristics
Deviation
	Influence of ambient temperature	max. 0.05 &Omega,/K
Conformity
Degree of protection	IEC 60529
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Storage temperature	-25 ... 70 °C (-13 ... 158 °F)
Relative humidity	max. 75 % , without condensation
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Core cross-section	max. 2 x 2.5 ... mm2
Mass	approx. 150 g
Dimensions	12.5 x 115 x 110 mm (0.5 x 4.5 x 4.3 inch)
Construction type	modular terminal housing , see system description
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate	BAS 01 ATEX 7005
	Marking	II (1)G [Ex ia Ga] IIC, II (1)D [Ex ia Da] IIIC, I (M1) [Ex ia Ma] I (-20 °C &le, Tamb &le, 60 °C)
	Voltage	terminals 1, 2: 5.88 V / terminals 3, 4: 5.88 V
	Current	terminals 1, 2: 140 mA / terminals 3, 4: 140 mA
	Power	terminals 1, 2: 206 mW / terminals 3, 4: 206 mW
Supply
	Maximum safe voltage	250 V
Series resistance	min. 42.14 &Omega,
Certificate	TÜV 99 ATEX 1484 X
	Marking	II 3G Ex nA IIC T4 Gc [device in zone 2]
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
IECEx approval	IECEx BAS 09.0142 IECEx BAS 17.0091X
	Approved for	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I Ex ec IIC T4 Gc
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.