| General specifications |
| Design / Mounting | Motherboard based |
| Supply |
| Rated voltage | 19.2 ... 35 V DC SELV/PELV |
| Rated current | 120 ... 70 mA |
| Power dissipation | max. 2.5 W |
| Fieldbus interface |
| Fieldbus type | FOUNDATION Fieldbus |
| Physical layer profile | profile type 114 |
| ITK version | 6 |
| Implementation | resource block1x RS
function block4x MDI, 1x MDO, 1x MAI, 1x DI
transducer block16x ADM TB, 1x IO TB |
| Firmware update | Ethernet |
| Polarity | polarity-sensitive |
| Rated voltage | 9 ... 35 V SELV/PELV |
| Rated current | 0 mA |
| Ethernet Interface |
| Port | 100 BASE-TX |
| Protocol | TCP/IP and UDP/IP |
| Services | ICMP , DHCP , AutoIP , HTTP |
| Connection type | RJ-45 socket, 8-pin |
| Transfer rate | 100 MBit/s |
| Diagnostic Bus |
| Number of Diagnostic Bus Channels | 2 |
| Number of Diagnostic Modules/Channel | 31 Using Ethernet Interface , 8 Using Fieldbus Interface |
| Termination | integrated |
| Cable length/Channel | 30 m |
| Indicators/operating means |
| LED ERR | red: Hardware fault |
| LED PWR | green: Power on |
| LINK/ACT | yellow |
| CH1, CH2 | yellow: diagnostic bus activity |
| Outputs |
| Output I | alarm output diagnostic bus channel 1 , volt-free contact , NC contact |
| Voltage | 50 V DC |
| Current | max. 1 A |
| Output II | alarm output diagnostic bus channel 2 , volt-free contact , NC contact |
| Voltage | 50 V DC |
| Current | max. 1 A |
| Output III | common alarm , volt-free contact , NC contact |
| Voltage | 50 V DC |
| Current | max. 1 A |
| Galvanic isolation |
| All circuits/FE | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Output I, II/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 250 Veff |
| Ethernet/Supply | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Ethernet/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Fieldbus/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Diagnostic Bus/other circuits | functional insulation acc. to IEC 62103, rated insulation voltage 50 Veff |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 |
| Low voltage | |
| Directive 73/23/EEC | EN 61010 |
| Standard conformity |
| Galvanic isolation | IEC 62103 |
| Electromagnetic compatibility | NE 21 |
| Degree of protection | IEC 60529 |
| Fieldbus standard | IEC 61158-2 |
| Climatic conditions | DIN IEC 721 |
| Shock resistance | EN 60068-2-27 |
| Vibration resistance | EN 60068-2-6 |
| Ethernet | IEEE 802.3 |
| Ambient conditions |
| Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) hazardous area
-40 ... 70 °C (-40 ... 158 °F) safe area horizontal DIN rail mounting
|
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity | < 95 % non-condensing |
| Shock resistance | 15 g 11 ms |
| Vibration resistance | 1 g , 10 ... 150 Hz |
| Pollution degree | max. 2, according to IEC 60664 |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
| Mechanical specifications |
| Housing material | Polycarbonate |
| Housing width | see dimensions |
| Housing height | see dimensions |
| Housing depth | see dimensions |
| Degree of protection | IP20 |
| Mass | 470 g |
| Mounting | DIN rail mounting |
| Data for application in connection with hazardous areas |
| Certificate | TÜV 14 ATEX 115980 X |
| Marking | II 3 G Ex nA IIC T4 Gc |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010 |
| International approvals |
| IECEx approval | IECEx TUN 14.0003X |
| Approved for | Ex nA IIC T4 Gc |
