Pepperl+Fuchs FI-PFH-NS0137-R 225293

Manufacturer

Pepperl+Fuchs

Name

FI-PFH-NS0137-R

Part number

225293

Country

Germany

Type

Termination Board

Weight (g)

266

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This HART termination board has 16 terminal blocks to connect up to 16 HART field devices. It has an integrated, switchable 220  load resistor and an integrated ground capacitor. It also has terminal blocks for the 4 mA ... 20 mA signal to the DCS/ PLC. A 26-pin flat cable K-HM26 is used for connection of each HART Multiplexers KFD*-HM*-16 to the termination board. Other termination boards are available. Contact Pepperl+Fuchs for details.

Worldwide delivery services

Ways of payment

Product Description
HART termination board for K-System HART Multiplexer

HART signal channels (non-intrinsically safe)
Load resistor	220 &Omega, , switchable on
Interface
Type	multiplexer connection : 26-pin NFP-26A (Yamaichi)
Signal lines
Rated current	max. 30 mA per channel
Indicators/settings
Control elements	DIP-switch
DIP switch	selection of operating mode: - ON: without load resistor - OFF: with load resistor
Factory setting	DIP switches S1 and S2: ON
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2012 For further information see system description.
Degree of protection	IEC 60529:2001
Shock resistance	EN 60068-2-27
Vibration resistance	EN 60068-2-6
Ambient conditions
Ambient temperature	0 ... 50 °C (32 ... 122 °F)
Storage temperature	-15 ... 50 °C (5 ... 122 °F)
Relative humidity	&le, 93 % non-condensing
Shock resistance	15 g , 11 ms
Vibration resistance	1 g , 10 ... 150 Hz
Mechanical specifications
Degree of protection	IP20
Connection
	Field side	screw terminals , green
	Control side	screw terminals , green HART : 1 x IDC plug, 26-pin
Core cross-section	screw terminals: 0.25 ... 1.5 mm2 (24 ... 16 AWG)
Mass	approx. 200 g
Dimensions	110 x 125 x 67 mm (4.3 x 4.9 x 2.6 inch)
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
Certificate	PF 11 CERT 1930 X
	Marking	II 3G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-15:2010
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.