Pepperl+Fuchs HIC2822 216690

Manufacturer

Pepperl+Fuchs

Name

HIC2822

Part number

216690

Country

Germany

Type

Switch Amplifier

Weight (g)

136

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It transfers digital signals (NAMUR sensors/mechanical contacts) from a hazardous area to a safe area. The proximity sensor or switch controls a normally open relay output for the safe area load. The device output changes the state when the input signal changes the state. The mode of operation can be reversed with the switches S1 and S3 of the device. Line fault detection (LFD) can be selected or disabled via the switches S2 and S4. During an error condition, the relay reverts to its de-energized state and the LEDs indicate the fault. A separate fault output bus is available. The fault conditions can be monitored via a Fault Indication Board. This module mounts on a HiC Termination Board.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 2
Supply
Connection	SL1: 1a(-), 1b(-), 2a(+), 2b(+)
Rated voltage	19 ... 30 V DC bus powered via Termination Board
Ripple	&le, 10 %
Rated current	&le, 30 mA
Power dissipation	&le, 600 mW
Power consumption	&le, 600 mW
Input
Connection side	field side
Connection	SL2: 5a(+), 5b(-), 1a(+), 1b(-)
Rated values	acc. to EN 60947-5-6 (NAMUR), see manual for electrical data
Open circuit voltage/short-circuit current	approx. 10 V DC / approx. 8 mA
Switching point/switching hysteresis	1.2 ... 2.1 mA / approx. 0.2 mA
Line fault detection	breakage I &le, 0.1 mA , short-circuit I &ge, 6.5 mA
Pulse/Pause ratio	min. 20 ms / min. 20 ms
Output
Connection side	control side
Connection	SL1: 8a, 7a, 10a, 9a
Output I	signal , relay
Output II	signal , relay
Contact loading	50 V DC / 0.5 A
Minimum switch current	2 mA / 24 V DC
Energized/De-energized delay	&le, 20 ms / &le, 20 ms
Mechanical life	107 switching cycles
Fault indication output
Connection	SL1: 6b
Output type	open collector transistor (internal fault bus)
Transfer characteristics
Switching frequency	&le, 10 Hz
Galvanic isolation
Output/power supply	basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC
Output/Output	basic insulation acc. to EN 50178, rated insulation voltage of 50 V AC
Indicators/settings
Display elements	LEDs
Control elements	DIP-switch
Configuration	via DIP switches
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Galvanic isolation	EN 50178:1997
Electromagnetic compatibility	NE 21:2006 For further information see system description.
Degree of protection	IEC 60529:2001
Input	EN 60947-5-6:2000
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Mass	approx. 100 g
Dimensions	12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch)
Mounting	on Termination Board
Coding	pin 1 and 2 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate	BASEEFA 06 ATEX 0093 X
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! Um is no rated voltage.)
Output
	Contact loading	50 V DC / 0.5 A
	Maximum safe voltage	253 V AC (Attention! The rated voltage can be lower.)
Certificate	PF 08 CERT 1047 X
	Marking	II 3G Ex nA nC IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	Control drawing	16-534FM-12 (cFMus)
UL approval
	Control drawing	116-0434
IECEx approval	IECEx BAS 06.0026X
	Approved for	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.