Pepperl+Fuchs KCD2-SR-Ex2 216720

Manufacturer

Pepperl+Fuchs

Name

KCD2-SR-Ex2

Part number

216720

Country

Germany

Type

Switch Amplifier

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It transfers digital signals (NAMUR sensors/mechanical contacts) from a hazardous area to a safe area. The proximity sensor or switch controls a form A normally open relay contact for the safe area load. The normal output state can be reversed using switch S1. Switch S2 allows output II to be switched between a signal output and an error message output. Switch S3 enables or disables line fault detection of the field circuit. During an error condition, relays revert to their de-energized state and LEDs indicate the fault according to NAMUR NE44. A unique collective error messaging feature is available when used with the Power Rail system. Due to its compact housing design and low heat dissipation, this device is useful for detecting positions, end stops, and switching states in space-critical applications.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 2
Supply
Connection	Power Rail or terminals 9+, 10-
Rated voltage	19 ... 30 V DC
Ripple	&le, 10 %
Rated current	&le, 30 mA
Power dissipation	&le, 600 mW
Power consumption	&le, 600 mW
Input
Connection side	field side
Connection	terminals 1+, 2-, 3+, 4-
Rated values	acc. to EN 60947-5-6 (NAMUR)
Open circuit voltage/short-circuit current	approx. 10 V DC / approx. 8 mA
Switching point/switching hysteresis	1.2 ... 2.1 mA / approx. 0.2 mA
Line fault detection	breakage I &le, 0.1 mA , short-circuit I &ge, 6.5 mA
Pulse/Pause ratio	min. 20 ms / min. 20 ms
Output
Connection side	control side
Connection	terminals 5, 6, 7, 8
Output I	signal , relay
Output II	signal , relay
Contact loading	253 V AC/2 A/cos &phi, > 0.7, 126.5 V AC/4 A/cos &phi, > 0.7, 30 V DC/2 A resistive load
Minimum switch current	2 mA / 24 V DC
Energized/De-energized delay	&le, 20 ms / &le, 20 ms
Mechanical life	107 switching cycles
Transfer characteristics
Switching frequency	&le, 10 Hz
Galvanic isolation
Input/Output	reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Input/power supply	reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Output/power supply	reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Input/input	Basic insulation according to EN 50178, rated insulation voltage 300 Veff
Output/Output	reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff
Indicators/settings
Display elements	LEDs
Control elements	DIP-switch
Configuration	via DIP switches
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility	NE 21
Degree of protection	IEC 60529:2001
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Mass	approx. 100 g
Dimensions	12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate	BASEEFA 06 ATEX 0092
	Marking	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I
	Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
	Voltage	10.5 V
	Current	17.1 mA
	Power	45 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC (Attention! Um is no rated voltage.)
Output
	Contact loading	253 V AC/2 A/cos &phi, > 0.7, 126.5 V AC/4 A/cos &phi, > 0.7, 30 V DC/2 A resistive load
	Maximum safe voltage	253 V AC (Attention! The rated voltage can be lower.)
Certificate	PF 06 CERT 0972 X
	Marking	II 3G Ex nA nC IIC T4 Gc
Output I, II
	Contact loading	50 V AC/2 A/cos &phi, > 0.7, 30 V DC/2 A resistive load
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	Control drawing	116-0419 (cFMus)
UL approval
	Control drawing	116-0420 (cULus)
IECEx approval	IECEx BAS 06.0025
	Approved for	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.