Pepperl+Fuchs SC-GPCS-UNI16-PF 209365

Manufacturer

Pepperl+Fuchs

Name

SC-GPCS-UNI16-PF

Part number

209365

Country

Germany

Type

Termination Board

Weight (g)

1018

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

The function of the termination board and the connector pin assignment is exactly fitted to the requirements of Honeywell system. Information about a missing supply voltage of the isolators is available for the system as a volt-free contact. Wiring faults from the field side will be reported via the same relay contact, if this function is supported by the isolators. The termination board is supplied with a robust plastic housing. This design permits the fast and reliable installation on 35 mm DIN mounting rail according to EN 60715 in the switch cabinet.

Worldwide delivery services

Ways of payment

Supply
Connection	terminal block TB3 (1-, 2+, 3-, 4+)
Nominal voltage	24 V DC , in consideration of rated voltage of used isolators
Voltage drop	0.9 V , voltage drop across the series diode on the termination board must be considered
Ripple	&le, 10 %
Fusing	4 A
Power dissipation	&le, 500 mW , without modules
Reverse polarity protection	yes
Redundancy
Supply	Redundancy available. The supply for the isolators is decoupled, monitored and fused.
Fault indication output
Output type	volt-free contact
Contact loading	30 V DC , 1 A
Indicators/settings
Display elements	LEDs PWR ON (power supply) - LED power supply I, green LED - LED power supply II, green LED LED Fault (fault indication), green LED
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2017 For further information see system description.
Degree of protection	IEC 60529:2001
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Storage temperature	-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection	IP20
Connection
	Field side	explosion hazardous area: pluggable screw terminals , blue
	Control side	non-explosion hazardous area: 37-pin Sub-D connector
	Supply	pluggable screw terminals , black
	Fault output	pluggable screw terminals , black
Core cross-section	screw terminals: 0.25 ... 2.5 mm2 (24 ... 12 AWG)
Material	housing: polycarbonate
Mass	approx. 825 g
Dimensions	273 x 155 x 153 mm (L x W x H) , height including module assembly
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-Type Examination Certificate	CESI 06 ATEX 022
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Non-hazardous area
	Maximum safe voltage	250 V (Attention! Um is no rated voltage.)
Certificate	DEMKO 18 ATEX 2116 X
	Marking	II 3G Ex ec nC IIC T4 Gc
Galvanic isolation
	Field circuit/control circuit	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-7:2015 , EN 60079-11:2012 , IEC 60079-15:2017 , EN 50303:2000
International approvals
UL approval
	Control drawing	116-0327
IECEx approval
	IECEx certificate	IECEx CES 06.0003 IECEx UL 18.0111 X
	IECEx marking	[Ex ia Ga] IIC [Ex ia Da] IIIC [Ex ia Ma] I Ex ec nC IIC T4 Gc
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Designation	provided accessory: Label Carrier HiALC-HITF-SET-1* optional accessories: - system cable CAB-HON-*-S37C32-MX-01000 - HART communication board HiATB01-HART-2X16 - HART multiplexer master HiDMux2700 - HART connection cable HiACA-UNI-FLK34-M*