| General specifications |
| Signal type | Digital Input |
| Functional safety related parameters |
| Safety Integrity Level (SIL) | SIL 2 |
| Supply |
| Connection | Power Rail or terminals 14+, 15- |
| Rated voltage | 20 ... 30 V DC |
| Ripple | &le, 10 % |
| Rated current | &le, 50 mA |
| Input |
| Connection side | field side |
| Connection | terminals 1+, 2+, 3-, 4+, 5+, 6- |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Open circuit voltage/short-circuit current | approx. 8 V DC / approx. 8 mA |
| Switching point/switching hysteresis | 1.2 ... 2.1 mA / approx. 0.2 mA |
| Line fault detection | breakage I &le, 0.1 mA , short-circuit I > 6 mA |
| Output |
| Connection side | control side |
| Connection | output I: terminals 7+ , output II: terminals 9+ |
| Signal level | 1-signal: (L+) - 3.5 V (100 mA, short-circuit protected)
0-signal: switched off (off-state current &le, 10 µ,A) |
| Output I, II | signal , electronic output, active |
| Collective error message | Power Rail |
| Transfer characteristics |
| Switching frequency | &le, 5 kHz |
| Galvanic isolation |
| Input/Output | reinforced insulation acc. to IEC 62103, rated insulation voltage 300 Vrms |
| Input/power supply | reinforced insulation acc. to IEC 62103, rated insulation voltage 300 Vrms |
| Output/power supply | not available , common pole terminal 14+ |
| Input/input | not available |
| Output/Output | not available , common pole terminal 14+ |
| Indicators/settings |
| Display elements | LEDs |
| Control elements | DIP-switch |
| Configuration | via DIP switches |
| Labeling | space for labeling at the front |
| Directive conformity |
| Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
| Conformity |
| Galvanic isolation | IEC 62103:2003 |
| Electromagnetic compatibility | NE 21:2004 |
| Degree of protection | IEC 60529:2001 |
| Input | EN 60947-5-6:2000 |
| Ambient conditions |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications |
| Degree of protection | IP20 |
| Connection | screw terminals |
| Mass | approx. 150 g |
| Dimensions | 20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2 |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Data for application in connection with hazardous areas |
| EU-Type Examination Certificate | PTB 00 ATEX 2035 |
| Marking | II (1) G [Ex ia] IIC
II (1) D [Ex ia] IIIC |
| Input | Ex ia IIC, Ex ia IIIC |
| Voltage | 10.5 V |
| Current | 13 mA |
| Power | 34 mW (linear characteristic) |
| Supply | |
| Maximum safe voltage | 40 V DC (Attention! The rated voltage can be lower.) |
| Output | |
| Maximum safe voltage | 40 V DC (Attention! The rated voltage can be lower.) |
| Certificate | TÜV 99 ATEX 1499 X |
| Marking | II 3G Ex nA II T4 |
| Galvanic isolation | |
| Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Input/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
| Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 50303:2000 |
| International approvals |
| FM approval | |
| Control drawing | 116-0035 |
| CSA approval | |
| Control drawing | 116-0047 |
| IECEx approval | |
| IECEx certificate | IECEx PTB 05.0011 |
| IECEx marking | [Ex ia] IIC , [Ex ia] I , [Ex ia] IIIC |
| General information |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Accessories |
| Optional accessories | - power feed module KFD2-EB2(.R4A.B)(.SP)
- universal power rail UPR-03(-M)(-S)
- profile rail K-DUCT-BU(-UPR-03) |
