General specifications |
Signal type | Analog output |
Functional safety related parameters |
Safety Integrity Level (SIL) | SIL 2 |
Supply |
Connection | SL1: 1a(-), 1b(-), 2a(+), 2b(+) |
Rated voltage | 19 ... 30 V DC bus powered via Termination Board |
Ripple | &le, 10 % |
Rated current | &le, 30 mA at 24 V |
Power dissipation | &le, 600 mW at 20 mA and 500 &Omega, load |
Power consumption | &le, 700 mW |
Input |
Connection side | control side |
Connection | SL1: 8a(+), 7a(-) |
Input signal | 4 ... 20 mA , limited to approx. 26 mA |
Input voltage | open loop voltage of the control system < 30 V |
Voltage drop | approx. 6 V at 20 mA |
Input resistance | > 100 k&Omega,, with field wiring open |
Output |
Connection side | field side |
Connection | SL2: 5a(+), 5b(-) |
Voltage | &ge, 13 V at 20 mA |
Current | 4 ... 20 mA |
Load | 0 ... 650 &Omega, |
Ripple | 20 mV rms |
Transfer characteristics |
Deviation | at 20 °C (68 °F), 4 ... 20 mA
< 0.1 % of full scale, incl. non-linearity and hysteresis |
| Influence of ambient temperature | < 2 µ,A/K (-20 ... 70 °C (-4 ... 158 °F)) |
Frequency range | field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 3 kHz (-3 dB)
control side into the field side: bandwidth with 1 mApp signal 0 ... 3 kHz (-3 dB) |
Rise time | 10 to 90 % &le, 10 ms |
Galvanic isolation |
Input/Output | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Input/power supply | basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff |
Output/power supply | safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V |
Indicators/settings |
Display elements | LED |
Labeling | space for labeling at the front |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) |
Conformity |
Electromagnetic compatibility | NE 21:2012
EN 61326-3-2:2008
For further information see system description. |
Degree of protection | IEC 60529:2001 |
Protection against electrical shock | UL 61010-1:2012 |
Ambient conditions |
Ambient temperature | -20 ... 70 °C (-4 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP20 |
Mass | approx. 100 g |
Dimensions | 12.5 x 128 x 106 mm (0.5 x 5.1 x 4.2 inch) |
Mounting | on Termination Board |
Coding | pin 1 and 3 trimmed
For further information see system description. |
Data for application in connection with hazardous areas |
EU-type examination certificate | CESI 06 ATEX 017 |
| Marking | II (1)G [Ex ia Ga] IIC
II (1)D [Ex ia Da] IIIC
I (M1) [Ex ia Ma] I |
| Output | Ex ia |
Supply | |
| Maximum safe voltage | 250 V AC (Attention! Um is no rated voltage.) |
Equipment | SL2: 5a(+), 5b(-) |
| Voltage Uo | 25.2 V |
| Current Io | 100 mA |
| Power Po | 630 mW |
| Internal capacitance Ci | 5.7 nF |
| Internal inductance Li | negligible |
Certificate | CESI 19 ATEX 027 X |
| Marking | II 3G Ex ec IIC T4 Gc |
Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-7:2015 |
International approvals |
FM approval | |
| FM certificate | FM 19 US 0122 X , FM 19 CA 0065 X |
| Control drawing | 116-0470 (cFMus) |
UL approval | E106378 |
| Control drawing | 116-0458 (cULus) |
IECEx approval | |
| IECEx certificate | IECEx CES 06.0002X |
| IECEx marking | [Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
Ex ec IIC T4 Gc |
General information |
Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |