IFM PN3070

Application
Measuring element	Metal thin film element
Application	For general industrial applications
Media	Liquid or gaseous media
Measured medium temperature [°C]	-25…80
Pressure strength	800 bar 11580 psi 80 MPa
Min. bursting pressure	1700 bar 24650 psi 170 MPa
Vacuum resistance [mbar]	-1000
Pressure type	Relative pressure
Electronic data
Operating voltage [V]	18…30 DC, (according to EN 50178 SELV/PELV)
Current consumption [mA]	<35
Min. insulation resistance [M?]	100, (500 V DC)
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	0.3
Built-in watchdog	yes
Inputs/outputs
Number of inputs and outputs	Number of digital outputs: 1, Number of analog outputs: 1
Outputs
Total number of outputs	2
Output signal	Switching signal, analogue signal, IO- Link, (configurable)
Electrical version	PNP
Number of digital outputs	1
Output function	normally open / normally closed, (parameterizable)
Max. voltage drop DC switching output [V]	2.5
DC switching output load current DC [mA]	150, (200 (…60 °C) 250 (…40 °C))
DC switching frequency [Hz]	<170
Number of analog outputs	1
Analog current output [mA]	4… 20
Maximum load [?]	500
Analog voltage output [V]	0…10
Min. load resistance [?]	2000
Short circuit protection	yes
Type of short-circuit protection	clocked
Overcurrent protection	yes
Measuring/setting range
Measuring range	0…400 bar 0…5800 psi 0…40 MPa
Setting point SP	4…400 bar 40…5800 psi 0.4… 40 MPa
Reset point rP	2…398 bar 20…5780 psi 0.2…39.8 MPa
In increments	2 bar 20 psi 0.2 MPa
Accuracy/Uncertainty
Switch point error [% of range]	<± 0.5
Repeatability [% of range]	<± 0.1, (when changing <10 K)
Deviation from curve [% of span]	<± 0.25 (BFSL) / <± 0.5 (LS ), (BFSL = Best Fit Straight Line, LS = Set Limit)
Hysteresis deviation [% of range]	<± 0.25
Long-term stability [% of range]	<± 0.05, (for 6 months)
Zero point temperature coefficient [% of measuring range / 10 K]	0.2, (-25…80 °C)
Span temperature coefficient [ % of measuring range / 10 K]	0.2, (-25…80 °C)
Response time
Response time [ms]	<3
Programmable delay time dS, dr [s]	0…50
Damping switching output dAP [s]	0…4
Damping analogue output dAA [s]	0…4
Max. analog output response time [ms]	3
Software / Programming
Parameter selection	Hysteresis / Window, Normally Open / Normally Closed, On / Off Delay, Damping, Display, Current / Voltage Output
Interfaces
Communication interface	IO-Link
Transmission method	COM2
IO-Link test	1.1
SDCI standard	IEC 61131-9
IO-Link Device ID	427 d / 00 01 ab h
Profiles	Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis
SIO Mode	yes
Desired port type	A
Analog operating data	1
Binary operating data	1
Minimum operating cycle time [ms]	2.3
Operating conditions
Ambient temperature [°C]	-25…80
Storage temperature [°C]	-40…100
Degree of protection	IP 65, IP 67
Tests / approvals
EMC

DIN EN 61000-6-2
DIN EN 61 000-6-3

Impact resistance

DIN EN 60068-2-27

50 g (11 ms)

Vibration resistance

DIN EN 60068-2-6

20 g (10 …2000 Hz)

MTTF [years]165UL Certification

UL Registration Number

J006

Pressure Equipment DirectiveGood engineering practice, can be used for fluid group 2, fluid group 1 on requestMechanical dataWeight [g]231.5Material1.4542 (17-4 PH / 630), stainless steel steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC environment1.4542 (17-4 PH / 630)Min. pressure cycles100 millionTightening torque [Nm]25…35, (recommended tightening torque, V depending on lubrication, sealing and pressure rating)Process connectionThreaded connection G 1/4 female thread M6 IBuilt-in limiternone (can be modified)Displays / ControlsDisplay

Display	3 x LED, green (bar, psi, MPa)
Output status	1 x LED, yellow
Measured values	alphanumeric display, red /green 4-digit

Notes Packing quantity1 pieceelectrical connectionConnection Connector: 1 x M12, Contacts: gold-plated