| 300 bar | |
| Min. bursting pressure | |
| Vacuum resistance [mbar] | -1000 |
| Pressure type | Relative pressure |
| Electronic data |
|---|
| Operating voltage [V] | 18…30 DC, (according to EN 50178 SELV/PELV) |
| Current consumption [mA] | <35 |
| Min. insulation resistance [M?] | 100, (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.3 |
| Built-in watchdog | yes |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 1, Number of analog outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | Switching signal, analogue signal, IO- Link, (configurable) |
| Electrical version | PNP |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed, (parameterizable) |
| Max. voltage drop DC switching output [V] | 2.5 |
| DC switching output load current DC [mA] | 150, (200 (…60 °C) 250 (…40 °C)) |
| DC switching frequency [Hz] | <170 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4… 20 |
| Maximum load [?] | 500 |
| Analog voltage output [V] | 0…10 |
| Min. load resistance [?] | 2000 |
| Short circuit protection | yes |
| Type of short-circuit protection | clocked |
| Overcurrent protection | yes |
| Measuring/setting range |
|---|
| Measuring range | | 0…100 bar | 0…1450 psi | 0…10 MPa |
|
| Setting point SP | | 1…100 bar | 10…1450 psi | 0.1… 10 MPa |
|
| Reset point rP | 0.5…99.5 bar| 5…1445 psi | 0.05…9.95 MPa |
|
| In increments | |
| Accuracy/Uncertainty |
|---|
| Switch point error [% of range] | <± 0.5 |
| Repeatability [% of range] | <± 0.1, (with temperature change <10 K) |
| Deviation from curve [% of span] | <± 0.25 (BFSL) / <± 0.5 (LS ), (BFSL = Best Fit Straight Line, LS = Set Limit) |
| Hysteresis deviation [% of range] | <± 0.25 |
| Long-term stability [% of range] | <± 0.05, (for 6 months) |
| Zero point temperature coefficient [% of measuring range / 10 K] | 0.2, (-25…80 °C) |
| Span temperature coefficient [ % of measuring range / 10 K] | 0.2, (-25…80 °C) |
| Response time |
|---|
| Response time [ms] | <3 |
| Programmable delay time dS, dr [s] | 0…50 |
| Switching output damping dAP [s] | 0…4 |
| Analog output damping dAA [s] | 0…4 |
| Max. analog output response time [ms] | 3 |
| Software / Programming |
|---|
| Parameter selection | Hysteresis / Window, Normally Open / Normally Closed, On / Off Delay, Damping, Display, Current / Voltage Output |
| Interfaces | >
|---|
| Communication interface | IO-Link |
| Transmission method | COM2 |
| IO-Link test | 1.1 |
| SDCI standard | IEC 61131-9 |
| IO-Link Device ID | 429 d / 00 01 ad h |
| Profiles | Smart Sensor: Process Data Variable, Device Identification, Device Diagnosis |
| SIO mode | yes |
| Desired port type | A |
| Analog operating data | 1 |
| Binary operating data | 1 |
| Minimum operating cycle time [ms] | 2.3 | 2.3 |
| |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…80 |
| Storage temperature [°C] | -40…100 |
| Degree of protection | IP 65, IP 67 |
| Tests / approvals |
|---|
| EMC | | DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Impact resistance | | DIN EN 60068-2-27 | 50 g (11 ms ) |
|
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10…2000 Hz) |
|
| MTTF [years] | 187 |
| UL certified | | UL registration number | J005 |
|
| Pressure Equipment Directive | Good engineering practice, can be used for fluid group 2, fluid group 1 on request |
| Mechanical data |
|---|
| Weight [g] | 271 |
| Material | stainless steel steel (1.4404 / 316L) stainless steel steel (1.4404 / 316L), PBT+PC-GF30, PBT-GF20, PC medium | stainless steel steel (1.4404 / 316L) stainless steel steel (1.4404 / 316L), Al2O3 (ceramic), FKM |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 25…35, (recommended tightening torque, V depending on lubrication, sealing and pressure rating) |
| Process connection | Threaded connection G 1/4 female thread M6 I |
| Built-in limiter | none (can be modified) |
| Displays / Controls |
|---|
| Display | | Display | 3 x LED, green (bar, psi, MPa) | | Output status | 1 x LED, yellow | | Measured values | alphanumeric display, red /green 4-digit |
|
| Notes |
|---|
| Packing quantity | 1 piece |
| electrical connection |
|---|
| Connection | Connector: 1 x M12, Contacts: gold-plated |
