Manufacturer
AirCom Pneumatic
Part number
PV631-04
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The piezo miniature flow valve is highly reliable and combines
precise control of flow rates with power consumption under 7 mW.
It is extremely compact and weighs only 23 g. Therefore, it is
very suitable for battery-operated portable devices. Preferred
application in medical engineering. Electronics are not necessary.
Media: 50 µm filtered compressed air or non-corrosive gases
Flange_connection:
according to CNOMO E06.36.120N (15 x 15 mm) or
CNOMO E06.05.80 (30 x 30 mm) with adapter
Operating_pressure: see chart, max. 8 bar
Supply_voltage: 0...40 V DC, residual ripple < 10%, without reverse voltage protection
Electrical_connector:
plug, contact gap 9.4 mm, 3-pin, with coupling socket (Pg 7P),
optionally with wire, red (+), black (-)
Note: The current is to be limited by a > 30 Ω resistor connected in series.
Life_cycle: < 1 billion switching cycles at 6 bar
Power_consumption: < 100 µA, i.e. 7 mW
Switch-on_consumption: 0.6 W
Response_time: 50 ms
Protection_class: IP 65 with coupling socket
Mounting_position: any
Temperature_range: 0 °C to 60 °C / 32 °F to 140 °F
Body: PPS plastic
Elastomer: NBR/Buna-N
Inner_valve: piezoelectric ceramics
Manifold_block: brass (M5), zinc die-cast (G1/8), polyamide (Ø4)
precise control of flow rates with power consumption under 7 mW.
It is extremely compact and weighs only 23 g. Therefore, it is
very suitable for battery-operated portable devices. Preferred
application in medical engineering. Electronics are not necessary.
Media: 50 µm filtered compressed air or non-corrosive gases
Flange_connection:
according to CNOMO E06.36.120N (15 x 15 mm) or
CNOMO E06.05.80 (30 x 30 mm) with adapter
Operating_pressure: see chart, max. 8 bar
Supply_voltage: 0...40 V DC, residual ripple < 10%, without reverse voltage protection
Electrical_connector:
plug, contact gap 9.4 mm, 3-pin, with coupling socket (Pg 7P),
optionally with wire, red (+), black (-)
Note: The current is to be limited by a > 30 Ω resistor connected in series.
Life_cycle: < 1 billion switching cycles at 6 bar
Power_consumption: < 100 µA, i.e. 7 mW
Switch-on_consumption: 0.6 W
Response_time: 50 ms
Protection_class: IP 65 with coupling socket
Mounting_position: any
Temperature_range: 0 °C to 60 °C / 32 °F to 140 °F
Body: PPS plastic
Elastomer: NBR/Buna-N
Inner_valve: piezoelectric ceramics
Manifold_block: brass (M5), zinc die-cast (G1/8), polyamide (Ø4)
