Manufacturer
AirCom Pneumatic
Part number
R110-040
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
Diaphragm regulator with small dimensions. Suitables for low
pressure and high accuracy applications. It's special diaphragm ensure constant outlet pressure even with
changing supply pressure and flow fluctuations.
Media: compressed air or non-corrosive gases
Recommendation: connection thread G½ for pressure range 0...35 / 140 / 280 mbar
Supply_pressure: max. 10 bar
Accuracy: response sensitivity = < 0,2 mbar
Air_consumption: max. 2 l/min depending on outlet pressure
Adjustment: by handwheel with locknut
Relieving_function: relieving, optionally non-relieving
Relief_capacity: 14 l/min at 7 mbar above setpoint 70 mbar
Gauge_port: G1/4 on both sides of the body, optionally 1/4˝NPT
Mounting_position: any
Temperature_range:
0 °C to 90 °C / 32 °F to 194 °F, for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: aluminium die-cast
Inner_valve: stainless steel and galvanised steel
Elastomer: NBR/Buna-N, optionally FKM
pressure and high accuracy applications. It's special diaphragm ensure constant outlet pressure even with
changing supply pressure and flow fluctuations.
Media: compressed air or non-corrosive gases
Recommendation: connection thread G½ for pressure range 0...35 / 140 / 280 mbar
Supply_pressure: max. 10 bar
Accuracy: response sensitivity = < 0,2 mbar
Air_consumption: max. 2 l/min depending on outlet pressure
Adjustment: by handwheel with locknut
Relieving_function: relieving, optionally non-relieving
Relief_capacity: 14 l/min at 7 mbar above setpoint 70 mbar
Gauge_port: G1/4 on both sides of the body, optionally 1/4˝NPT
Mounting_position: any
Temperature_range:
0 °C to 90 °C / 32 °F to 194 °F, for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: aluminium die-cast
Inner_valve: stainless steel and galvanised steel
Elastomer: NBR/Buna-N, optionally FKM