Manufacturer
AirCom Pneumatic
Part number
RH10-02B
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
For outlet pressures up to 15 bar the regulator has a diaphragm,
for higher outlets a piston. A sintered bronze filter at the inlet
port protects against contamination.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 220 bar
Adjustment:
- RH10-02 by black plastic knob
- all others by T-handle with locknut
Gauge_port:
All regulators are equipped with both one supply pressure gauge and
one outlet pressure gauge.
Relief_valve: prevents from overpressure, see chart
Compensation:
All regulators are equipped with supply pressure variation compensation,
so that a change in supply
pressure has no effect on the outlet pressure's
stability.
Mounting_position: any
Temperature_range: -20 °C to 60 °C / -4 °F to 140 °F
Body: brass, nickel-plated at RH10-02
Inlet_filter: sintered bronze
Piston: brass at RH10-02
O-rings: EPDM or FPM, dependent on media
Valve_seat: nylon
Diaphragm: stainless steel at RH10-02, NBR/Buna-N at all others
for higher outlets a piston. A sintered bronze filter at the inlet
port protects against contamination.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 220 bar
Adjustment:
- RH10-02 by black plastic knob
- all others by T-handle with locknut
Gauge_port:
All regulators are equipped with both one supply pressure gauge and
one outlet pressure gauge.
Relief_valve: prevents from overpressure, see chart
Compensation:
All regulators are equipped with supply pressure variation compensation,
so that a change in supply
pressure has no effect on the outlet pressure's
stability.
Mounting_position: any
Temperature_range: -20 °C to 60 °C / -4 °F to 140 °F
Body: brass, nickel-plated at RH10-02
Inlet_filter: sintered bronze
Piston: brass at RH10-02
O-rings: EPDM or FPM, dependent on media
Valve_seat: nylon
Diaphragm: stainless steel at RH10-02, NBR/Buna-N at all others
