Wenglor B50R110

• MultiCore technology
• OCR reading

The OCR reader is based on the wenglor MultiCore technology and reads up to 100 characters simultaneously. The functions region of interest and tracking are available for improved plain text reading. Reliable reading, comparing and good/bad-evaluation of various characters and symbols are easily possible.

Lens thread	C-Mount
Resolution	736 ? 480 Pixel
Image Chip	monochrome
Image chip size	1/3'
Pixel Size	6 ? 6 µm
Service Life (T = +25 °C)	100000 h
Frame Rate	25 Hz

Electrical Data

Supply Voltage	18...30 V DC
Current Consumption (Ub = 24 V)	< 200 mA
Response Time	40 ms
Temperature Range	-25...55 °C*
Inputs/Outputs	6
Switching Output Voltage Drop	< 2,5 V
Switching Output/Switching Current	100 mA
Short Circuit Protection	yes
Reverse Polarity Protection	yes
Interface	RS-232/Ethernet
Protection Class	III

Mechanical Data

Setting Method	Ethernet
Housing Material	Aluminum
Degree of Protection	IP67
Connection	M12 ? 1, 12-pin
Type of Connection Ethernet	M12 ? 1, 8-pin, X-cod.

Safety-relevant Data

MTTFd (EN ISO 13849-1)

263,03 a

General Data

Web server

yes

Function

OCR	yes
Tracking	yes

Output

Configurable as PNP/NPN/Push-Pull	yes
Switchable to NC/NO	yes
Illumination Output	yes
RS-232 Interface	yes
Ethernet	yes
PROFINET	yes
EtherNet/IP™	yes

Display brightness may decrease with age. This does not result in any impairment of the sensor function.* -25° C: Ambient conditions should not result in condensation, avoid the formation of ice on the front panel!55° C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of ? 5 ms, may affect the service life of the product.