- Image processing functions
- MultiCore technology
- OCR reading
- Pattern matching
- Reading of printed and directly marked 1D and 2D codes
The smart camera weQube is based on the wenglor MultiCore technology and combines the function of the scanner and the vision sensors. Therefore, this product allows to capture all established 1D codes and various 2D code types. Autofocus, region of interest and tracking ensure reliable and stable image recording. The following image processing modules are available: Dimensional accuracy check, sorting procedures, presence control, object counting, position output, pixel counting, optical character recognition, pattern matching, filter options, and statistics evaluation.
Working Range | ? 20 mm |
Resolution | 736 ? 480 Pixel |
Image Chip | monochrome |
Light Source | White Light |
Service Life (T = +25 °C) | 100000 h |
Visual Field | see Table 1 |
Frame Rate | 25 Hz |
Electrical Data
Supply Voltage | 18...30 V DC |
Current Consumption (Ub = 24 V) | < 200 mA |
Response Time | 40 ms |
Temperature Range | -25...55 °C* |
Inputs/Outputs | 6 |
Switching Output Voltage Drop | < 2,5 V |
Switching Output/Switching Current | 100 mA |
Short Circuit Protection | yes |
Reverse Polarity Protection | yes |
Interface | RS-232/Ethernet |
Protection Class | III |
Mechanical Data
Setting Method | Ethernet |
Housing Material | Aluminum |
Degree of Protection | IP67 |
Connection | M12 ? 1, 12-pin |
Type of Connection Ethernet | M12 ? 1, 8-pin, X-cod. |
Safety-relevant Data
MTTFd (EN ISO 13849-1) | 227,7 a |
General Data
Function
Presence Check | yes |
Pixel Comparison | yes |
Reference Image Comparison | yes |
Tracking | yes |
OCR | yes |
Object detection | yes |
Dimensional accuracy check | yes |
1D and 2D code reading | yes |
Pattern matching | yes |
Output
Configurable as PNP/NPN/Push-Pull | yes |
Switchable to NC/NO | yes |
Illumination Output | yes |
RS-232 Interface | yes |
Ethernet | yes |
PROFINET | yes |
EtherNet/IP | yes |
Display brightness may decrease with age. This does not result in any impairment of the sensor function.* -25° C: Ambient conditions should not result in condensation, avoid the formation of ice on the front panel!55° C: Continuous illumination at max. 1% or flash mode at 100% brightness with an exposure time of ? 5 ms, may affect the service life of the product.