Manufacturer
VUOTOTECNICA
Part number
VTL75/G1
Country
Italy
Type
Vacuum pump
Sale of any product from the VUOTOTECNICA catalog at competitive prices
2technologie will help you choose and buy products and spare parts from VUOTOTECNICA (official website: www.vuototecnica.biz). We sell only certified goods and give an official guarantee from the manufacturer VUOTOTECNICA
These vacuum pumps have a suction flow rate of 75, 90 and 105 m3/h.
The vacuum lubrication with oil recirculation is adjusted via two oilers located in correspondence of the support bearings.
The rotor is cantilevered-fitted on the motor shaft and supported by independent bearings housed in the two pump flanges.
The pump and the electric motor are, therefore, two independent units and fixed onto a special support and connected to each other via an elastic transmission joint.All this allows using standard electric motors, in the shapes and sizes indicated in the table.
The pump is surface cooled. Heat is dispersed from the outer surface, suitably finned, by means of a radial fan placed between motor and pump.
An oil recovery tank is installed on the pump exhaust. This tank contains a separator filter that prevents oil mists and reduces noise.
A check valve and a filter must be installed on the suction inlet.
These pumps are supplied with three-phase electric motors only.
