General specifications |
Design / Mounting | Cabinet installation |
Supply |
Connection | Power Rail or terminals 11 (L+), 12 (L-) |
Rated voltage | 20 ... 30 V DC |
Ripple | &le, 10 % |
Rated current | 640 mA ... 365 mA |
Power dissipation | max 2.5 W |
Fieldbus interface |
PROFIBUS PA | |
| Connection | 3+, 6+, 2-, 5-, 1 shield, 4 shield |
| Rated voltage | 24 ... 26 V |
| Rated current | max. 400 mA |
| Terminating impedance | 100 &Omega, , integrated |
PROFIBUS DP | PROFIBUS with RS-485 transmission technology |
| Connection | terminals 7 RxD/TxD-P, 8 RxD/TxD-N, 9 shield, 10 FE |
| Baud rate | 1.5 MBit/s max. |
Indicators/operating means |
Switch | PROFIBUS DP terminator |
LED PWR | green: Power on |
LED DP/ERR | red 2 Hz flashing: DP error red on: Hardware error red off: DP communication detected |
LED PA | red 2 Hz flashing: No PA communication or overload Off: PA communication OK |
Galvanic isolation |
PROFIBUS DP/PROFIBUS PA | functional insulation acc. to IEC 62103, rated insulation voltage 50 V AC /70 V DC |
PROFIBUS DP/Supply | basic insulation according to IEC/EN 61010, rated insulation voltage 253 V AC /357 V DC |
PROFIBUS PA/Supply | basic insulation according to IEC/EN 61010, rated insulation voltage 253 V AC /357 V DC |
Directive conformity |
Electromagnetic compatibility | |
| Directive 2014/30/EU | EN 61326-1:2013 |
Standard conformity |
Electromagnetic compatibility | NAMUR NE 21 |
Degree of protection | IEC/EN 60529 |
Fieldbus standard | EN 50170/2 |
Climatic conditions | DIN IEC 721 |
Shock resistance | EN 60068-2-27 |
Vibration resistance | EN 60068-2-6 |
Ambient conditions |
Ambient temperature | -40 ... 60 °C (-40 ... 140 °F) |
Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
Relative humidity | < 95 % non-condensing |
Shock resistance | 15 g 11 ms |
Vibration resistance | 1 g 10 ... 150 Hz |
Pollution degree | max. 2, according to IEC 60664 |
Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 |
Mechanical specifications |
Connection type | Terminals |
Core cross-section | up to 2.5 mm2 |
Housing material | Polycarbonate |
Degree of protection | IP20 |
Mass | 180 g |
Mounting | DIN rail mounting |
Data for application in connection with hazardous areas |
Statement of conformity | TÜV 16 ATEX 7831 X |
| Group, category, type of protection, temperature class | II 3G Ex ec IIC T4 Gc |
Directive conformity | |
| Directive 2014/34/EU | EN 60079-0:2012 , EN 60079-7:2015 |
International approvals |
CSA approval | CSA 16.70064204 |
| Approved for | Class I, Division 2, Groups A, B, C, D
Class I, Zone 2, Ex nA IIC T4 Gc |
IECEx approval | IECEx TUR 16.0006X |
| Approved for | Ex ec IIC T4 Gc |