Pepperl+Fuchs KFA5-DWB-EX1.D 231208

Manufacturer

Pepperl+Fuchs

Name

KFA5-DWB-EX1.D

Part number

231208

Country

Germany

Type

Frequency Converter

Weight (g)

396

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It monitors for an overspeed or underspeed condition of a discrete signal (NAMUR sensor/ mechanical contact) from a hazardous area by comparing the input frequency to the user programmed reference frequency. An overspeed or underspeed condition is signaled via the relay outputs. Line fault detection of the field circuit is indicated by a red LED and relay. The start-up override feature sets relay outputs to default conditions programmed by the user for up to 1,000 seconds. The unit is easily programmed by the use of a keypad located on the front of the unit. For additional information, refer to the manual and www.pepperl-fuchs.com.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Digital Input
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 2
Supply
Connection	terminals 23, 24
Rated voltage	115 V AC +/- 10 %
Rated current	30 mA
Power dissipation/power consumption	&le, 2 VA / 2 VA
Input
Connection side	field side
Connection	Input I: intrinsically safe: terminals 1+, 3- Input II: non-intrinsically safe: terminals 13+, 14-
Input I	acc. to EN 60947-5-6 (NAMUR), see system description for electrical data
	Pulse duration	> 50 µ,s
	Input frequency	0.001 ... 5000 Hz
	Line fault detection	breakage I &le, 0.15 mA, short-circuit I > 6.5 mA
Input II	startup override: 1 ... 1000 s, adjustable in steps of 1 s
	Active/Passive	I > 4 mA (for min. 100 ms)/ I < 1 mA
	Open circuit voltage/short-circuit current	18 V / 5 mA
Output
Connection side	control side
Connection	output I: terminals 10, 11, 12 output II: terminals 16, 17, 18
Output I, II	signal, relay
	Contact loading	250 V AC / 2 A / cos &phi, &ge, 0.7 , 40 V DC / 2 A
	Mechanical life	5 x 107 switching cycles
	Energized/De-energized delay	approx. 20 ms / approx. 20 ms
Transfer characteristics
Input I
	Measurement range	0.001 ... 5000 Hz
	Resolution	0.1 % of the measurement value , &ge, 0.001 Hz
	Accuracy	0.1 % of the measurement value , > 0.001 Hz
	Measuring time	< 100 ms
	Influence of ambient temperature	0.003 %/K (30 ppm)
Output I, II
	Response delay	&le, 200 ms
Galvanic isolation
Input I/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output I, II against eachother	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Output I, II/other circuits	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Start-up override/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elements	LEDs , display
Control elements	Control panel
Configuration	via operating buttons
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Low voltage
	Directive 2014/35/EU	EN 61010-1:2010
Conformity
Electromagnetic compatibility	NE 21:2006
Degree of protection	IEC 60529:2001
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Mass	300 g
Dimensions	40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) , housing type C3
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate	TÜV 99 ATEX 1408
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
Supply
	Maximum safe voltage	253 V AC (Attention! Um is no rated voltage.)
Input I	terminals 1+, 3-: Ex ia
	Voltage Uo	10.1 V
	Current Io	13.5 mA
	Power Po	34 mW (linear characteristic)
Input II	terminals 13+, 14- non-intrinsically safe
	Maximum safe voltage Um	40 V (Attention! The rated voltage can be lower.)
Output I, II	terminals 10, 11, 12, 16, 17, 18 non-intrinsically safe
	Maximum safe voltage	253 V (Attention! The rated voltage can be lower.)
	Contact loading	253 V AC/2 A/cos &phi, > 0.7, 40 V DC/2 A resistive load (TÜV 99 ATEX 1471)
Certificate	TÜV 02 ATEX 1885 X
	Marking	II 3G Ex nA nC IIC T4 Gc
Output I, II
	Contact loading	50 V AC/2 A/cos &phi, > 0.7, 40 V DC/1 A resistive load
Galvanic isolation
	Input I/other circuits	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	Control drawing	16-538FM-12
UL approval	E223772
IECEx approval
	IECEx certificate	IECEx TUN 03.0000
	IECEx marking	[Ex ia Ga] IIC , [Ex ia Da] IIIC , [Ex ia Ma] I
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.