Pepperl+Fuchs EI-0D2-10Y-10B 194658

Manufacturer

Pepperl+Fuchs

Name

EI-0D2-10Y-10B

Part number

194658

Country

Germany

Type

Fieldbus

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

The Ethernet Isolator is an intrinsically safe isolated barrier. It enables cost effective and simple installation in hazardous areas up to Zone 0. It supports high-speed Ethernet and can be mounted in Zone 2. At each end of the trunk, an Ethernet Isolator is installed. In combination, they provide the intrinsically safe energy limitation. The Ethernet Isolator offers a wire-based alternative to wireless LAN, fiber optic solutions, and Ex e installations. In safe area applications, a single Ethernet Isolator can be used for galvanic isolation. The Ethernet Isolator is compatible with all IEEE standards. It provides high noise immunity and low heat dissipation in a compact housing.

Worldwide delivery services

Ways of payment

Supply
Rated voltage	19.2 ... 35 V DC
Rated current	150 ... 100 mA
Power dissipation	3 W
Ethernet Interface
Intrinsically safe port	10 BASE-T/100 BASE-TX
Non-intrinsically safe port	10 BASE-T/100 BASE-TX
Connection type	2 x RJ-45 , IEC 60603-7
Connector pinout	socket , TIA/EIA-568-B
Transfer rate	10/100 Mbit/s , Auto-Negotiation
Operating mode	Half/Full Duplex
Cable type	CAT5e S/FTP AWG 24, Installation cable, L/R ratio max. 10 µH/&Omega, of all strand combinations
I.S. cable length	typ. 100 m/20 °C
Total cable length	typ. 200 m/20 °C
Number of isolators	max. 2 in series connection
Indicators/operating means
LED PWR	green: Power on
LED ACT	yellow: communication active
LED 10/100	yellow ON: Transfer rate 100 MBit/s , OFF: 10 MBit/s
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Galvanic isolation	EN 50020
Degree of protection	IEC 60529
Climatic conditions	DIN IEC 721
Shock resistance	EN 60068-2-27
Vibration resistance	EN 60068-2-6
Ethernet	IEEE 802.3 , IEEE 802.3u
Ambient conditions
Ambient temperature	-40 ... 60 °C (-40 ... 140 °F)
Storage temperature	-40 ... 85 °C (-40 ... 185 °F)
Relative humidity	&le, 95 % non-condensing
Shock resistance	15 g 11 ms
Vibration resistance	1 g 10 ... 150 Hz
Pollution degree	max. 2, according to IEC 60664
Mechanical specifications
Connection type	Terminals
Core cross-section	up to 2.5 mm2
Housing material	Polyamide PA 66
Degree of protection	IP20 according to EN 60529
Mass	195 g
Mounting	DIN rail mounting
Data for application in connection with hazardous areas
EU-Type Examination Certificate	PTB 07 ATEX 2025 X
	Marking	II (1) G [Ex ia Ga] IIB , II (1) D [Ex ia Da] IIIC , II 3(1)G Ex nA [ia Ga] IIB T4 Gc II 3 (1D) G Ex nA [ia IIIC Da] IIB T4 Gc I (M1) [Ex ia Ma] I
Supply
	Maximum safe voltage	253 V AC
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
CSA approval	CSA 15.70016295
	Control drawing	116-B032
	Approved for	Class I, Zone 2, AEx/Ex nA [ia Ga] IIB T4 Gc Class I, Zone 2, AEx/Ex nA [ia Da IIIC] IIB T4 Gc
IECEx approval	IECEx PTB 09.0053X
	Approved for	[Ex ia Ga] IIB [Ex ia Da] IIIC Ex nA [ia Ga] IIB T4 Gc Ex nA [ia IIIC Da] IIB T4 Gc [Ex ia Ma] I
Certificates and approvals
Patents	This product may be covered by the following patent: US7,687,791