Pepperl+Fuchs KFD2-SL2-Ex2 184258

Manufacturer

Pepperl+Fuchs

Name

KFD2-SL2-Ex2

Part number

184258

Country

Germany

Type

Solenoid Driver

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. The device supplies power to solenoids, LEDs and audible alarms located in a hazardous area. It is controlled via logic signals. The inputs have two defined states: 1-Signal = 16 V DC ... 30 V DC, 0-Signal = 0 V DC ... 5 V DC. The current consumption of the input is about 3 mA. At full load, 11.7 V at 45 mA is available for the hazardous area application. If the field impedance is > 10 kΩ for lead breakage or < 50 Ω for short circuits a line fault is detected. A fault is signalized by LEDs and a separate collective error message output.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Digital Output
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 2
Supply
Connection	Power Rail or terminals 14+, 15-
Rated voltage	20 ... 30 V DC
Power consumption	max. 3.3 W at 45 mA output current
Input
Connection side	control side
Connection	terminals 7, 8, 9
Input current	approx. 3 mA at 24 V DC
Signal level	1-signal: 16 ... 30 V DC 0-signal: 0 ... 5 V DC
Output
Connection side	field side
Connection	channel 1: terminals 1+, 2-, 3 channel 2: terminals 4+, 5-, 6-
Internal resistor	272 &Omega,
Current	&le, 45 mA
Voltage	&ge, 11.7 V
Open loop voltage	min. 24 V
Output signal	These values are valid for the rated operating voltages from 20 ... 30 V DC.
Energized/De-energized delay	&le, 20 ms / &le, 20 ms
Line fault detection	signal at short-circuit RB <50 &Omega,, lead breakage RB> 10 k&Omega, , test current < 650 µ,A
Galvanic isolation
Input/Output	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Input/power supply	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Power supply/Output	reinforced insulation according to IEC/EN 61010-1, rated insulation voltage 300 Veff
Indicators/settings
Display elements	LEDs
Control elements	DIP-switch
Configuration	via DIP switches
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2006
Degree of protection	IEC 60529:2001
Protection against electrical shock	EN 61010-1:2010
Ambient conditions
Ambient temperature	-20 ... 50 °C (-4 ... 122 °F)
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Mass	approx. 150 g
Dimensions	20 x 119 x 115 mm (0.8 x 4.7 x 4.5 inch) , housing type B2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-Type Examination Certificate	ZELM 00 ATEX 0024
	Marking	II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC I (M1) [Ex ia Ma] I
	Output	Ex ia
	Voltage	28 V
	Current	110 mA
	Power	770 mW (linear characteristic)
Supply
	Maximum safe voltage	40 V (Attention! The rated voltage can be lower.)
Input
	Maximum safe voltage	60 V (Attention! The rated voltage can be lower.)
Collective error message
	Maximum safe voltage	40 V (Attention! The rated voltage can be lower.)
Certificate	TÜV 02 ATEX 1820 X
	Marking	II 3G Ex nA IIC T4 Gc
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 , EN 60079-26:2007 , EN 50303:2000
International approvals
CSA approval
	Control drawing	116-0304
IECEx approval
	IECEx certificate	IECEx TUN 04.0001
	IECEx marking	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
General information
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.
Accessories
Optional accessories	- power feed module KFD2-EB2(.R4A.B)(.SP) - universal power rail UPR-03(-M)(-S) - profile rail K-DUCT-BU(-UPR-03)