Pepperl+Fuchs KFD2-VM-EX1.35.L 103076

Manufacturer

Pepperl+Fuchs

Name

KFD2-VM-EX1.35.L

Part number

103076

Country

Germany

Type

Solenoid Driver

Weight (g)

144

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. It supplies power to solenoids and other similar loads. It is controlled by two OR and one AND configured logic input. At full load, 15.3 V at 17 mA is available for the hazardous area load. The output signal has a resistive characteristic. An override/test jack feature is available on the front plate of the device. By engaging the service plug, the logic inputs are bypassed and the output is energized. The operation of this test feature is indicated by a red LED.

Worldwide delivery services

Ways of payment

Product Description
Output 22.3 V

General specifications
Signal type	Digital Output
Supply
Connection	Power Rail or terminals 11+, 12-
Rated voltage	20 ... 30 V DC
Ripple	&le, 10 %
Rated current	&le, 52 mA
Power dissipation	typ. 1.2 W
Power consumption	< 1.5 W
Input
Connection	terminals 7+, 8+, 9+
Signal level	1-signal: 15 ... 30 V DC , input current: approx. 2.3 mA at 24 V DC 0-signal: 0 ... 5 V DC or open input
Response delay	5 ... 30 ms (typical 10 ms)
Output
Internal resistor	max. 410 &Omega,
Limit	current IE: &ge, 17 mA, typ. 18 mA voltage UE: &ge, 15.3 V, typ. 16 V
Open loop voltage	min. 22.3 V
Connection	terminals 4+, 6-
Output rated operating current	17 mA
Output signal	These values are valid for the rated operating voltages from 20 ... 30 V DC.
Transfer characteristics
Switching frequency	15 Hz
Galvanic isolation
Input/power supply	not available
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21
Degree of protection	IEC 60529:2001
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Mass	approx. 150 g
Dimensions	20 x 107 x 115 mm (0.8 x 4.2 x 4.5 inch) , housing type B1
Data for application in connection with hazardous areas
EU-type examination certificate	PTB 00 ATEX 2132
	Marking	II (1)GD [EEx ia] IIC [circuit(s) in zone 0/1/2]
	Output	EEx ia IIC
	Voltage	25.2 V DC
	Current	67.2 mA
	Power	423.5 mW (linear characteristic)
Supply
	Maximum safe voltage	253 V AC/125 V DC without jumper 10-11, 60 V with jumper 10-11 (Attention! Um is no rated voltage.)
Input
	Maximum safe voltage	60 V (Attention! Um is no rated voltage.)
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Output/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012
General information
Supplementary information	EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.