Pepperl+Fuchs 283725

Manufacturer

Pepperl+Fuchs

Part number

283725

Country

Germany

Type

Transmitter Power Supply

Sale of any product from the Pepperl+Fuchs catalog at competitive prices

2technologie will help you choose and buy products and spare parts from Pepperl+Fuchs (official website: www.pepperl-fuchs.com). We sell only certified goods and give an official guarantee from the manufacturer Pepperl+Fuchs

This isolated barrier is used for intrinsic safety applications. The device supplies 2-wire and 3-wire SMART transmitters in a hazardous area, and can also be used with 2-wire SMART current sources. It transfers the analog input signal to the safe area as two isolated voltage values. Digital signals may be superimposed on the input signal in the hazardous or safe area and are transferred bi-directionally. If the HART communication resistance in the loop is too low, the internal resistance of 250 Ω between terminals 8, 9 and 11, 12 can be used. Test sockets for the connection of HART communicators are integrated into the terminals of the device.

Worldwide delivery services

Ways of payment

General specifications
Signal type	Analog input
Functional safety related parameters
Safety Integrity Level (SIL)	SIL 3
Supply
Connection	Power Rail or terminals 14+, 15-
Rated voltage	20 ... 35 V DC
Ripple	within the supply tolerance
Power dissipation	1.8 W
Power consumption	2.4 W
Input
Connection side	field side
Connection	terminals 1+, 2-, 3 or 5-, 6+
Input signal	0/4 ... 20 mA
Open circuit voltage/short-circuit current	terminals 1+, 3-: 22.7 V / 38 mA
Voltage drop	terminals 5, 6 : &le, 2.4 V at 20 mA
Input resistance	terminals 2-, 3: max. 76 &Omega, terminals 1+, 3: max. 500 &Omega, (250 &Omega, load)
Available voltage	terminals 1+, 3: &ge, 16 V at 20 mA
Output
Connection side	control side
Connection	terminals 7-, 8+,9, 10-, 11+,12
Load	output resistance: 500 &Omega,
Output signal	0/2 ... 10 V
Ripple	max. 25 mV
Transfer characteristics
Deviation	at 20 °C (68 °F), 0/2 ... 10 V &le, 10 mV incl. calibration, linearity, hysteresis, loads and fluctuations of supply voltage
	Influence of ambient temperature	&le, 20 ppm/K
Frequency range	field side into the control side: bandwidth with 0.5 Vpp signal 0 ... 7.5 kHz (-3 dB) control side into the field side: bandwidth with 0.5 Vpp signal 0.3 ... 7.5 kHz (-3 dB)
Rise time	20 µ,s
Settling time	200 µ,s
De-energized delay	20 µ,s
Galvanic isolation
Output/power supply	functional insulation, rated insulation voltage 50 V AC
Output/Output	functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements	LED
Labeling	space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility	NE 21:2011
Degree of protection	IEC 60529:2001
Protection against electrical shock	UL 61010-1:2012
Ambient conditions
Ambient temperature	-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection	IP20
Connection	screw terminals
Mass	approx. 200 g
Dimensions	20 x 124 x 115 mm (0.8 x 4.9 x 4.5 inch) , housing type B2
Mounting	on 35 mm DIN mounting rail acc. to EN 60715:2001
Data for application in connection with hazardous areas
EU-type examination certificate	BAS 99 ATEX 7060 X
	Marking	II (1)G [Ex ia Ga] IIC , II (1)D [Ex ia Da] IIIC , I (M1) [Ex ia Ma] I
	Input	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I
Supply
	Maximum safe voltage	250 V (Attention! The rated voltage can be lower.)
Equipment	terminals 1+, 3-
	Voltage Uo	25.4 V
	Current Io	86.8 mA
	Power Po	551 mW
	Internal capacitance Ci	12 nF
	Internal inductance Li	0
Equipment	terminals 2-, 3
	Current Io/Current Ii	74 mA / 115 mA
	Current Ii	115 mA
	Voltage Uo	3.5 V
	Current Io	74 mA
	Power Po	64 mW
Equipment	terminals 1+, 2 / 3-
	Voltage Ui	30 V
	Current Ii	115 mA
	Voltage Uo	25.4 V
	Current Io	115 mA
	Power Po	584 mW
Equipment	terminals 5-, 6+
	Voltage Ui	30 V
	Current Ii	115 mA
	Voltage Uo	8.7 V
	Current Io	0 mA
Certificate	TÜV 99 ATEX 1499 X
	Marking	II 3G Ex nA II T4 [device in zone 2]
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval
	Control drawing	116-0428 (cULus)
IECEx approval	IECEx BAS 04.0016X IECEx CML 15.0055X
	Approved for	[Ex ia Ga] IIC, [Ex ia Da] IIIC, [Ex ia Ma] I Ex nA IIC T4 Gc
General information
Note	Both output loads must be connected to ensure complete and correct operation within the technical specification.
Supplementary information	Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Specifications 283725

Related products 283725