MISUMI SECBL8-[41-129/1]

Precautions for Use Blocks are equipped with retainers (wire) to prevent balls from falling off. For how to handle the blocks, see >> P.525. Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations. Straight grooves are provided on datum planes. Be sure to match the datum lines when using. Rails cannot be connected end to end. The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance. Accessory • H8 comes with cap screws (M2x6). Others • Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ). • For Operating Life Calculation, see >> P. 527 • For operating life calculations, use our free calculation software from http://download.misumi.jp/mol/fa_soft.html. • The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Material Hardness	Type	MX (Lubrication Unit)	L Dimension
Light Preload	Slight Clearance
High Grade	Standard Grade
Standard Materials	Stainless Steel 56HRC~	SSECB	SSECBZ	Blank: None -MX: Provided	Selectable
SSECBL	SSECBLZ	Configurable
	Carbon Steel 58HRC~	SECB	SECBZ	-	Selectable
SECBL	SECBLZ	Configurable

Heat Resistant Temperature: -20 ~ 80C Specifications

Part Number	-	L
SSECB10 SSECB-MX10 SSECB10L SSECB10G	- - - -	275 275 75 75	(With Lubrication Unit) (L Type Greased) (G Type Greased)

Alternative grease types available >> P.531

Part Number	L	Block Dimension	Dowel Hole Dimension	Guide Rail Dimension
Type	MX	H	W	L1	B	C	Sx?	L2	K	Cb	N	C2	(?1)	W1	W2	H1	Ca	Counterbored Hole	F	G
d1xd2xh
Stainless Steel Standard Specifications SSECB SSECBL Carbon Steel SECB SECBL	SSECBZ SSECBLZ SECBZ SECBLZ	-	8	40~130	17	37.5	12	20	M2x2.5	27.5	6.5	0.3	8.5	20	2	7	5	4.7	0.3	2.4x4.2x2.3	15	5
Blank: None -MX: Provided (for stainless steel only)	10	55~275	20	49.6	15	26	M3x3	38.6	7.8	0.3	10	26	2.5	9	5.5	5.5	0.3	3.5x6x3.5	20	7.5
13	70~470	27	54.8	20	30	M3x3.5	40.8	10	0.5	13.5	30	3	12	7.5	7.5	0.5	3.5x6x4.5	25	10
16	110~670	32	70.3	25	40	M3x4	55.3	12	0.5	16	40	4	15	8.5	9.5	0.5	3.5x6x4.5	40	15

Alterations