Kuenle Antriebssysteme KHL

CONSTRUCTION The construction is geared towards high flexibility and versatility, both in use and for assembly been. The design is in the form of compact, functional elements that can be easily assembled into a wide variety of versions if required. With a power stage that is uniform for each size, a large number of gear reductions have been made possible with a high degree of economy. The spur gears are available for motor mounting according to the IEC standard as well as with a free input and output shaft in all sizes available. The high production quality is based on a planning technique that combines performance maximization and production control in every processing assembly stage as well as the end product. A very quiet and vibration-free run in all performance and operating conditions, as well as a high level of efficiency are also suitable for operation with high input speeds and switching frequencies. Thanks to the machining and assembly accuracy of the gears, careful parallelism of all shafts and bearing seats, and the compact design, a Transmission with reduced backlash has been realized. High transferable performance could be achieved through corrective interventions on the toothing and curvature of the profiles will. The transmittable torques were determined according to ISO 6336. In the two-stage version are gears available with a ratio of approx. 5:1 to 50:1, in the three-stage version up to 450:1. The third level of translation enables absolute coaxiality between input and output shaft. Optimized pairing of materials and corresponding thermal treatment processes combine high transferrable performance with a long service life. With the exception of size 20 (aluminium), all housings are made of high-quality gray cast iron with stiffening ribs.