| Application |
|---|
| Application | for Pt100 and Pt1000 sensors |
| Electronic data |
|---|
| Operating voltage [V] | 18…32 DC, ("supply class 2" according to cULus) |
| Current consumption [mA] | <50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 1 |
| Built-in watchdog | yes |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 1, Number of analog outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Output signal | Switching signal, analogue signal , IO-Link, (configurable) |
| Electrical version | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | n normally open / normally closed, (parameterizable) |
| Max. voltage drop of switching output DC [V] | 2.5 |
| DC load current of switching output DC [mA] | 250 |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4…20 |
| Maximum load [?] | 500 |
| Analog output according to voltage [V] | 0…10 |
| Min. load resistance [?] | 2000 |
| Short circuit protection | yes |
| Type of short-circuit protection | clocked |
| Overcurrent protection | yes |
| Measuring/setting range |
|---|
| Measuring range | |
| Factory setting | -40…300 °C / -40…572 °F |
| Setting point SP | | -99.8…600 °C | -147.6…1112 °F |
|
| Reset point rP | | -100…599.8 °C | -148…1111.6 ° F |
|
| Aanalog trigger point | |
| Analog endpoint | |
| In steps | |
| Resolution |
|---|
| Resolution of switching output [K] | 0.1 |
| Analog output resolution [K] | current output: MS / 4096, voltage output: MS / 3561 |
| Display Resolution [K] | 0.1 |
| Accuracy/Uncertainty |
|---|
| Switch point error [K] | ± 0.3 + (± 0.1 % MS) |
| Analog output accuracy [K] | ± 0.3 + (± 0.1 % MS) |
| Display Accuracy [K] | ± 0.3 + (± 0.1 % MS) |
| Temperature coefficient [% of measuring range / 10 K] | 0.1, (When deviating from standard conditions 25 ± 5 °C) |
| Response time |
|---|
| Response time [ms] | 390 |
| Max. analog output response time [ms] | 390 |
| Software / Programming |
|---|
| Parameter selection | Hysteresis / Window, Normally Open / Normally Closed, On / Off Delay, Damping, Display, Current / Voltage Output |
| Interfaces | >
|---|
| Communication interface | IO-Link |
| Transmission method | COM2 (38, 4 KBaud) |
| IO-Link test | 1.1 |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…80 |
| Storage temperature [°C] | -40…100 |
| Degree of protection | IP 67 |
| Tests / approvals |
|---|
| EMC | | DIN EN 61000-6-3 | | | DIN EN 61000-6-2 | |
|
| Impact resistance | | DIN IEC 68-2-27 | 50 g (11 ms) |
|
| Vibration resistance | | DIN EN 60068- 2-6 | 20 g (10…2000 Hz) |
|
| MTTF [ years] | 233 |
| UL Certification | | UL Registration Number | K011 |
|
| Mechanical data |
|---|
| Weight [g] | 200 |
| Material | stainless steel steel (1.4404 / 316L), stainless steel steel (1.4301/304), PBT+PC-GF30, PBT-GF20, PC |
| Displays / Controls |
|---|
| Display | | Display | 2 x LED, green | | Output status | LED, yellow | | Measured values | alphanumeric display, red/green 4-digit |
|
| Notes |
|---|
| Notes | | MS = measuring interval setting |
|
| Pack quantity | 1 piece |
| electrical connection |
|---|
| Connection | Connector: 1 x M12, Contacts: gold-plated |
