Application |
---|
Media | Liquids, Gases, Aggressive media |
Measured medium temperature [°C] | -25…80 |
Pressure strength [bar] | 100 |
Liquids |
---|
Measured medium temperature [°C] | -25…80 |
Gases |
---|
Measured medium temperature [°C] | -25…80 |
Electronic data |
---|
Operating voltage [V] | 19…36 DC |
Current consumption [mA] | < 60 |
Protection class | III |
Reverse polarity protection | yes |
Power-on delay time [s] | 10 |
Inputs/outputs |
---|
Number of inputs and outputs | Number of digital outputs: 1 |
Outputs |
---|
Total number of outputs | 1 |
Output signal | Switching signal |
Electrical version | PNP |
Number of digital outputs | 1 |
Output function | normally open / normally closed, (parameterizable) |
Max. voltage drop of switching output DC [V] | 2.5 |
DC load current of switching output DC [mA] | 250 |
Short-circuit protection | yes |
Short-circuit protection type | clocked |
Overcurrent protection | yes |
Measurement/setting range |
---|
Probe length L [mm] | 45 |
Liquids |
---|
Parameter setting within [cm/s] | 3…300 |
Max. sensitivity [cm/s] | 3…100 |
Gases |
---|
Parameter setting within [cm/s] | 200…3000 |
Max. sensitivity [cm/s] | 200…800 |
Accuracy/accuracy |
---|
Reproducibility [cm /s] | 1…5 |
Note about repeatability | for water 5…100 cm/s, 25 °C | Factory setting |
|
Temperature drift [cm/s x 1/K] | 0.1, (for water 5…100 cm/s, 10…70 °C) |
Max. temperature gradient (rate of change of medium temperature) [K/min] | 300 |
Switch point error [cm/ s] | ± 2…± 10, (for water 5…100 cm/s, 25 °C, factory setting) |
Hysteresis [cm/ s] | 2…5, (for water 5…100 cm/s, 25 °C, factory setting) |
Response time |
---|
Liquids |
---|
Response time [s] | 1…2, (for temperature gradient: 1 K/min) |
Gases |
---|
Response time [s] | 1 …10 |
Software / Programs programming |
---|
Setting the switch point | Programming buttons |
Operating conditions |
---|
Ambient temperature [°C] | -25…80 |
Storage temperature [°C] | -25…100 |
Degree of protection | IP 67 |
Tests / approvals | th> |
---|
EMC | EN 61000-4-2 ESD | 4 kV CD / 8 kV AD | EN 61000-4-3 HF radiation | 10 V/m | EN 61000-4-4 Burst | 2 kV | EN 61000-4-6 RF conductance | 10 V |
|
Impact resistance | DIN IEC 68 -2-27 | 50 g (11 ms) |
|
Vibration resistance | DIN EN 60068-2-6 | 20 g (55…2000 Hz) |
|
MTTF [years] | 298 |
Mechanical data |
---|
Weight [g] | 238 |
Dimensions [mm] | M18 x 1.5 |
Thread designation | M18 x 1.5 |
Material | stainless steel steel (1.4404 / 316L), stainless steel steel (1.4310 / 301), PC, PBT-GF20, EPDM/X medium | titanium (3.7035), O-ring: FKM 80 Shore A |
Process connection | M18 x 1.5 internal thread |
Displays / Controls |
---|
Display | Function | 10 x LED, 3-colour |
|
Remarks |
---|
Recommendations | Pay attention to the change in compressive strength |
Packing value | 1 piece |
electrical connection |
---|
Connection | Connector: 1 x M12 |