Supply of spare parts for industrial enterprises around the world

IFM SA5000

  IFM SA5000
Manufacturer
IFM
Part number
SA5000
Country
Germany
Sale of any product from the IFM catalog at competitive prices

2technologie will help you choose and buy products and spare parts from IFM (official website: www.ifm.com). We sell only certified goods and give an official guarantee from the manufacturer IFM


Measurement of flow and temperature at the same time. Optimised for water, oils and air. Red/green display for clear identification of the acceptable range. With switching output, analogue signal and IO-Link. The process connection can be rotated for optimum alignment.
Worldwide delivery services
Worldwide delivery services
Ways of payment
Ways of payment

Specifications SA5000

Application
MediaWater, glycol solutions, backlash, oils
Medium note
low viscosity oils with viscosity: ? 40 mm?/s (40 °C)
high viscosity oils with viscosity:> 40 mm?/s (40 °C)
Measured medium temperature [°C]-20…90
Pressure strength [bar]100
MAWP (for CRN application) [bar] 100
Electronic data
Operating voltage [V]18…30 DC
Current consumption [mA]<100
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]10
Inputs/outputs
Number of inputs and outputsNumber of digital outputs: 2 , Number of analog outputs: 1
Outputs
Total number of outputs2
Output signalSwitching signal, analogue signal, frequency signal, IO-Link, (configurable)
Electric Physical versionPNP/NPN
Number of digital outputs2
Output functionnormally open / normally closed, (parameterizable)
Max. voltage drop of switching output DC [V]2.5
DC load current of switching output DC [mA]250
Number of analog outputs1
Analog current output [mA]4…20, (scalable)
Maximum load [?]350
Short-circuit protectionyes
Short-circuit protection typeclocked
Overcurrent protectionyes
Output frequency [Hz]0…1000
Measuring/setting range
Probe length L [mm]45
Operating modeRelative, Absolute liquid, Absolute gaseous
Note on setting range
Operating mode: relative
Liquid media
Measuring range [m/s]0.04…3
N parameter setting within [m/s]0…6
Gases
Measuring range [m/s]2…100
Parameter setting within [m/s]0… 200
Temperature control
Measuring range [°C]-20… 90
Resolution [°C]0.2
Accuracy/Uncertainty
Flow rate control
Temperature drift [cm/s x 1/K]0.003 m /s x 1/K ( 70 °C)
Max. environment) [K/min]100
Accuracy (in measuring range)± (7% MW + 2% MEW), (for relative mode in the measuring range c:, Water: 20…70 °C, inlet pipe length: 1.5 m, DN25 (DIN 2448), installation position according to the instructions, Accuracy may differ for other media and mounting positions.)
Repeatability0.05 m/s, (Water, Flow velocity: 0.05…3 m/s)
Temperature control
Temperature drift± 0.005 K/°C
Accuracy [K]± 0.3 / ± 1, (Water, Flow velocity: 0.3…3 m/s / backlash, Flow velocity:> 10 m/s)
Reaction time
Flow rate control
Response time [s]0.5, (T09, Water, glycol: 0.8 s, backlash: 7 s, oil: 1.8 s, each T09)
Temperature control
Trip response time T05 / T09 [s]1.5 (T09), (Water, Flow rate: 0, 3…3 m/s)
Software / Programming
Parameter selectionHysteresis / window, normally open/normally closed, switching logic, current/frequency output, medium selection, damping, teach-in function, display can be rotated and switched off, standard unit of measure, process value color
Interfaces
Communication interfaceIO-Link
Transmission methodCOM2 (38.4 kBaud)
IO-Link test1.1
SDCI standard IEC 61131-9
IO-Link device ID533 d / 00 02 15 h (REL)
ProfilesSmart Sensor: Process Data Variable, Device Identification, Device Diagnosis
SIO Modeyes
Desired port typeA
Analog operating data2
Binary operating data2
Minimum operating cycle time [ms]3
Operating conditions
Ambient temperature [°C]-40…80
Storage temperature [°C]-40…100
Degree of protectionIP 65, IP 67
Tests / approvals
EMC
DIN EN 60947-5-9
Impact resistance
DIN EN 60068-2-2750 g (11 ms)
Vibration resistance
DIN EN 60068-2-620 g (10…2000 Hz)
MTTF [years]180
UL Certification
UL Registration NumberI003
Mechanical data
Weight [g]311.5
Materialstainless steel steel (1.4404 / 316L), stainless steel steel (1.4310 / 301), PBT-GF20, PBT-GF30 mediumstainless steel steel (1.4404 / 316L), gasket: FKM
Process connectionM18 x 1.5 female thread
Displays / Controls
Display
Display6 x LED, green (%, m/s, l/min, m?/h, °C, 10?)
Output status2 x LED, yellow
Measured valuesalphanumeric display, red/green 4 digits
Notes
Notes
MW = Measured value
MEW = Upper limit of measuring range
540 d / 00 02 1ch (LIQU)
547 d / 00 02 23 h (GAS)
Packing quantity1 piece
Electrical connection
ConnectionConnector: 1 x M12, Contacts: gold-plated