| Application |
|---|
| Application | For general industrial use |
| Medium | Liquid or gaseous media |
| Measured medium temperature [°C] | -40…90 |
| Pressure strength [bar] | 25 |
| Note on pressure strength | |
| Min. burst pressure [bar] | 300 |
| Vacuum resistance [mbar] | -1000 |
| Pressure type | Relative pressure |
| Electronic data |
|---|
| Operating voltage [ V] | 8.5…36 DC |
| Min. insulation resistance [M?] | 100, (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Number of analog outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 1 |
| Output signal | analog signal |
| Number of analog outputs | Number of analog outputs | td> | 1 |
| Analog current output [mA] | 4…20 |
| Maximum load [?] | 720, (Ub = 24 V, (Ub - 8.5 V) / 21.5 mA) |
| Short circuit protection | yes |
| Overcurrent protection | yes |
| Measuring/setting range |
|---|
| Measuring range [bar] | 0…10 |
| Accuracy/accuracy |
|---|
| Repeatability [% of span] | <± 0.05, (at temperature changes <10 K) |
| Deviation from characteristic [% range] | <± 0.5, (incl. drift at constriction, zero point error and errors, non-linearity, hysteresis) |
| Linearity deviation [% span] | <± 0.1 (BFSL) / <± 0.2 (LS) |
| Hysteresis deviation [% of span] | <± 0.2 |
| Long-term stability [% of span] | <± 0.1, (over 6 months) |
| Temperature coefficient of zero point and span [% from measuring range / 10 K] | <0.1 (-25...90 °C) / <0.2 (-40...-25 °C) |
| Response time |
|---|
| Analogue output transient rise time [ms] | 1 |
| Operating conditions |
|---|
| Ambient temperature [°C] | -40…90 |
| Storage temperature [°C] | -40…100 |
| Degree of protection | IP 67, IP 69K |
| Tests / Approvals |
|---|
| EMC | | DIN EN 61000-6-2 | | | DIN EN 61000-6-3 | |
|
| Impact resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10…2000 Hz) |
|
| MTTF [years] | 686 |
| Pressure Equipment Directive | Good engineering practice, can be used for fluid group 2, fluid group 1 on request |
| Mechanical data |
|---|
| Weight [g] | 59 |
| Material | 1.4542 (17-4 PH / 630), stainless steel steel (1.4404 / 316L), PEI environment | 1.4542 (17-4 PH / 630) |
| Min. pressure cycles | 60 million, (at 1.2 x rated pressure) |
| Tightening torque [Nm] | 25…35, (recommended tightening torque, depending on lubrication, sealing and pressure rating) |
| Process connection | G 1/4 male thread thread (DIN EN ISO 1179-2) |
| Process seal | FKM (according to DIN 3869) |
| Built-in delimiter | none |
| Notes |
|---|
| Notes | | BFSL = Best Fit Straight Line | | LS = Set Limit |
|
| Packing quantity | 1 piece |
| electrical connection |
|---|
| Connection | Connector: 1 x M12 |
