| Application |
|---|
| Measuring element | Ceramic capacitive pressure cell |
| Application | Hygienic systems |
| Media | Viscous media or liquids with suspended solids, Liquid or gaseous media |
| Measured medium temperature [°C] | -25…125, (150 max. 1h) |
| Pressure strength | |
| Min. burst pressure | |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure |
| No dead space | yes |
| MAWP (for use according to CRN) [bar] | 50 |
| Electronic data |
|---|
| Operating voltage [V] | 18…30 DC |
| Min. insulation resistance [M?] | 100, (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Built-in Watchdog | yes |
| 2-wire |
|---|
| Current consumption [mA] | 3.5…21.5 |
| Power-on delay time [s] | 1 |
| 3-wire |
|---|
| Current consumption [mA] | <45 |
| Power-on delay time [s] | 0.5 |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Number of analog outputs: 1 |
| Outputs |
|---|
| Total number of outputs | 1 |
| Output signal | analog signal |
| Number of analog outputs | 1 |
| Analog current output [mA] | 4…20, (scalable) |
| Maximum load [?] | 700, (Ub = 24 V, (Ub - 9 V) / 21.5 mA) |
| Prot short circuit protection | yes |
| Overcurrent protection | yes |
| Measuring/setting range |
|---|
| Measuring range | | -1…10 bar | -14.5…145 psi | -0.1…1 MPa |
|
| Analogue trigger point | | -1…8 bar | -14.5…116 psi | -0.1…0.8 MPa |
|
| Analog endpoint | | 1…10 bar | 14.5…145 psi | 0.1…1 MPa |
|
| In increments | | 0.005 bar | 0.1 psi | 0.0005 MPa |
|
| Factory setting | | ASP = 0.0 bar | AEP = 10.0 bar | |
|
| Precision/Error |
|---|
| Repeatability [% of range] | <± 0.1, (for temperature changes <10 K, Turn down 1:1) |
| Deviation from characteristic [% of range] | <± 0.2 (nach DIN EN 61298-2), (incl. Constriction drift, zero point error and error, non-linearity, hysteresis, Turn down 1:1) |
| Linearity deviation [% span] | <± 0 ,15, (Turn down 1:1) |
| Hysteresis deviation [% of range] | <± 0.15, (Turn down 1:1) |
| Long-term stability [% of range] | <± 0.1, (Turn down 1:1, per year) |
| Zero point temperature coefficient [% of measuring range / 10 K] | <± 0.05, (0...70 °C) |
| Temperature coefficient of span [% of span / 10 K] | <± 0.15, (0...70 °C) |
| Response time |
|---|
| Analog output damping dAA [s] | 0…4 |
| 2- wired |
|---|
| Analogue output step response rise time [ms] | 30 |
| 3 -wired |
|---|
| Analogue output step response rise time [ms] | 7 |
| Interfaces |
|---|
| Communication interface | IO-Link |
| Transmission method | COM2 (38 ,4 kBaud) |
| IO-Link check | 1.1 |
| IO-Link device ID | 662 d / 00 02 96 h |
| Profiles | Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
| SIO mode | none |
| Desired port type | A |
| Analog operating data | 3 |
| Minimum operating time its cycle [ms] | 3.2 |
| Operating conditions |
|---|
| Ambient temperature [° C] | -25…80 |
| Storage temperature [°C] | -40…100 |
| Degree of protection | IP 67, IP 68, IP 69K |
| Tests / approvals |
|---|
| EMC | | DIN EN 61000-6-2 | | DIN EN 61000-6-3 |
|
| Impact resistance | | DIN EN 60068-2-27 | 50 g (11 ms) |
|
| Vibration resistance | | DIN EN 60068-2-6 | 20 g (10…2000 Hz) |
|
| MTTF [years] | 323 |
| UL Certification | | UL Registration Number | J022 | td> |
|
| Mechanical data |
|---|
| Weight [g] | 302 |
| Material | stainless steel steel (1.4404 / 316L), PBT (polybutylene terephthalate) medium | Ceramic (99.9% Al2 O3), PTFE (Teflon), st. steel (1.4435 / 316L), surface characteristic: Ra <0.4 / Rz 4 |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 20, (recommended tightening torque Depending on lubricant , seals and pressure ratings) |
| Process connection | G threaded connection 1 external thread Sealing cone |
| Displays / Controls |
|---|
| Display | bar, psi, MPa |
| Notes |
|---|
| Packing quantity | 1 piece |
| Electrical connection |
|---|
| Connection | Connector: 1 x M12, Contacts: gold-plated |
