| Electronic data |
|---|
| Operating voltage [V] | 10…30 DC, ("supply class 2 » according to cULus) |
| Current consumption [mA] | 75, (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Type light | red light |
| Wavelength [nm] | 650 |
| Std. service life [h] | 50000 |
| Inputs/outputs |
|---|
| Number of inputs and outputs | Number of digital outputs: 2 |
| Outputs |
|---|
| Total number of outputs | 2 |
| Electrical version | PNP |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed, (complementary) |
| Max. current carrying capacity per output [mA] | 100 |
| DC switching frequency [Hz] | 11 |
| Short-circuit protection | yes |
| Short-circuit protection type | clocked | | |
| Overcurrent protection | Yes |
| Control range |
|---|
| Max. light spot diameter [mm] | 5 |
| Light spot dimensions in relation to | 2 m |
| Detection range hysteresis [%] | < 2.5 |
| Note on measuring range hysteresis | |
| Background suppression available | yes |
| Background suppression [m] | < 20 |
| Measuring range /settings |
|---|
| Measurement range [m] | 0.03…2 |
| Sampling frequency [ Hz] | 33 |
| Interfaces |
|---|
| Communication interface | IO- Link |
| Transmission method | COM2 (38.4 kBaud) |
| IO-Link test | 1.1 |
| SDCI standard | IEC 61131-9 |
| IO- Link Device ID | 372d / 00 01 74h |
| Profiles | Smart Sensor: Sensor Identification, Binary Data Channel, Process Value, Sensor Diagnosis osis |
| SIO mode | yes |
| Analog operating data | 1 |
| Binary operating data | 1 |
| Minimum operating cycle time [ms] | 6.6 |
| Operating conditions |
|---|
| Ambient temperature [°C] | -25…60 |
| Ambient temperature note | | at ta < -10 °C heating required, laser off |
|
| Degree of protection | IP 65, IP 67 |
| Max. ambient light immunity [klx] | 10, (on site) |
| Tests / approvals |
|---|
| EMC | |
| Class laser protection | 2 |
| Note on laser protection | | Attention: | Laser | | Power: | <= 4.0 mW | | Wavelength: | 650 nm | | Pulse: | 1.3 ns | | Do not stare into the beam. | | | Avoid exposure to laser radiation. | | | laser class: | 2 | | EN / IEC60825-1:2007 | | EN / IEC60825-1:2014 | | Complies with 21 CFR 1040 except for the exceptions described in Laser Notice No. 50, which is dated July 2007. |
|
| MTTF [years] | 151 |
| Mechanical data |
|---|
| Weight [g] | 85.5 |
| Casing | Rectangular |
| Dimensions [mm] | 56 x 18.2 x 46.8 |
| Material | Body: PA (polyamide), Front frame: Stainless steel, Operator interface: TPU, Optics: PMMA |
| Lens Attachment | Side Optics |
| Displays / Controls |
|---|
| Display | | Output status | LED, yellow Switching output PIN 4 | | Operating mode | LED, green | | Display | Alphanumeric display, 3 digits | | |
|
| Display | cm |
| Notes |
|---|
| Packing quantity | 1 piece |
| Electrical connection |
|---|
| Connection | Connector: 1 x M12 |
| diagrams and graphics |
|---|
< th>hysteresis plot| x: | distance [mm] |
|---|
| y: | Hysteresis [mm] |
|---|
| 1 = | background black 6% reflection |
|---|
| 2 = | background white 90% reflection |
|---|
|
| Other data |
|---|
| Precision |
|---|
