Gamma System B2

“Gamma System” pressure-sensitive edges are used to eliminate the risk of crashing or shearing associated with the operation of sliding doors, movable bulkheads, automated movable guards, electric doors, etc... Pressure-sensitive edges consist of an aluminium support channel section (C-shape) and a PVC section into which the safety sensor is housed. The safety sensor consists of two conductive reeds which are kept separate one from another by means of a non conductive part; reeds come into contact when the PVC section undergoes deformation. The pressure-sensitive edges are fitted with an auto-check module which verifies the continuity of connections and transforms the NO contact of the edge into an NC safety contact. “Gamma System” pressure-sensitive edges consist of the following parts: • Aluminium support channel (“C” shape). The C-shaped section may also be arranged with angle section (“L” shape) for vertical mounting orientation and with “I” iron for horizontal mounting orientation, sideways the edge. The PVC section can be supplied in 4 different configurations: Type B0, Type B1N, Type B2N, Type B2 Power cable length on request in accordance with EN ISO 13856-2 and EN 13849-1; EN 12978 for motorized doors and gates.