END-Armaturen TN111525-RT201210

3-way ball valve made of brass for shut-off of neutral gases and liquids (no steam) with directly mounted alectric actuator. The body consists of a multi-part screwed body construction, not crossover-free, sealed on all ports, with reduced bore and all-sided female thread. The mounting pad according to ISO 5211 allows direct assembly of pneumatic or electric actuators. The operation of the ball valve ensued by 90° rotation of the actuator. An actuator with 180° rotation angle and three switching positions 0°-90°-180° is also available on request. If not otherwise stated, we will provide switching position 1 (T-configuration) or 5 (L-configuration) at driven ball valves. Operation methods: Electric actuator with a rotation angle of 90°. Plastic housing with optical position indicator and manual override by outgoing shaft. With 1-wire control (integrated relay, Fail-close) for OPEN-CLOSE control or 2-wire control for 3-point control. Optical position indicator. For higher temperature ranges over +80°C please refer to the Pressure-Temperature-diagram in the data sheet. The ball valve is also available in many versions in our shop.

• L- or T- configuration
• manually operated
• manually operated with mounted limit switch box
• pneumatically operated with mounted pneumatic actuator, double or single acting
• electrically operated with mounted electric actuator

SKU	TN111525-RT201210
Description	Ball valve-TN, 1 , with drive-RT20-007, brass/PTFE-FKM, T-port, 24V AC / DC, run-time7 ...
Weight [kg]	3.130000
Voltage	24V DC
Nominal size	1
Body material	Brass
Body material	Messing verchromt
Seals material	PTFE
Stem seals material	PTFE/FKM
Operation	Electrically
Execution	T-configuration
Connection type	female / female
Connection size	1
Nominal pressure min. [bar]	0
Nominal pressure max. [bar]	16
Test pressure PT [bar]	24
Temperature range min. [°C]	-10
Temperature range max. [°C]	+55
Media temperature min. [°C]	-20
Media temperature max. [°C]	+120
Gehäusedesign	4-teilig