END-Armaturen DK340506377

Spring-force acting pressure-reducing valve with difference pressure piston. Multi-part design made of stainless steel, not back-controllable. FunctionThe discharge pressure acts upon the piston. The power resulting from this pressure compresses the spring as soon as it exceeds the spring resistance, thus closing the valve. This position persists as long as no medium is taken off the discharge pipe. Thus, the discharge pressure is kept at the value required by the setting. When media are taken off the discharge pipe the discharge pressure is reduced. The spring presses the diaphragm and causes opening of the valve. If the medium flows for a longer time, a self-adjustment of the valve opening will ensue instead of an abrupt succession of opening and closing movements. Pressure reducing valves for gaseous media have a damping device against pressure impacts. Settings Setting of the pressure reducing valve always takes place without flow, the manometer showing static pressure. Rising discharge pressure: Turn the set screw clockwise. Reducing discharge pressure: Turn set screw counter-clockwise. Take off some medium, thus reducing the pressure. Then tighten the screw until required pressure is attained. Decreasing pressure during media take-off is normal, it is caused by loss of pressure. You can order other pressure reducers online in our shop.

SKU	DK340506377
Description	Piston pressure Reducer DN50, stainless steel/EPDM, Inlet pressure: max.25bar, outlet pressure: 6-11ba
Weight [kg]	7.320000
Nominal size	DN050
Body material	Stainless Steel
Body material	0
Seals material	EPDM - max. 180°C
Stem seals material	0
Connection type	Welded connection DIN 11850-R2
Connection size	50
Media temperature min. [°C]	-20
Media temperature max. [°C]	+180
Gehäusedesign	0