Emirel AL-20N

FOR IMPULSIVE LOAD USE It supplies 24 Vdc (32W) voltage or 24 Vac (32VA), starting from 115Vac or 230Vac or 400 Vac. It is frequently applied in the Cyclic Pulses Generators where it is not available the voltage 24 Vdc (Mod. B and C) or the voltage 24 Vac (Mod. A). See Fig. 1, 2, 3. FEATURES The direct voltage output is stabilized. The alternating voltage output is not stabilized; it follows mains voltage variations. VISUALIZATIONS LED ON (Green) supply on LED L2 (Green) 24 Vdc on LED L3 (Green) 24 Vac on SUPPLY: 50÷60Hz (Tolerance ± 10%) Models pin 1-3 115 VAC A and B pin 1-4 230 VAC pin 1-5 400 VAC FUSE 5x20 1A rapid Model C pin 1-2 24 VAC FUSE 5x20 4A rapid OUTPUTS Model A: pin 6-8 24 Vac -1,3A Models B and C: pin 11-9 24 Vdc - 1,3A (+ on 11) - (In Model C the output is not galvanically insulated from the input). DIMENSIONS Watertight case IP 56 with transparent cover 150x110x70 mm. WORKING TEMPERATURE: 0÷60°C WEIGHT: 0,600 Kg COLOUR: Grey REMARK The device AL 20N is housed in a watertight case which does not easily exhaust the inside heat; for this reason it is suggested the application with impulsive loads, which do not require that the device AL 20N gives out the rated power permanently.