Di-Soric US 18 M 800 G3-B4 209865

Service voltage: 18 … 30 V DC No-load current (max.): 40 mA (24 V DC) Inverse polarity protection: Yes Short-circuit protection: Yes Insulation voltage endurance: 500 V Housing dimensions: M18 x 55 mm Thread: M18 x 1 Housing length: 55 mm Transmission exit: axial Assembly distance (sensor to sensor): 550 mm Housing material: Brass (nickel-plated) Material: Epoxy resin, PUR (Transducer surface) Weight: 30 g Protection class: III, operation on protective low voltage Operating principle: Ultrasonic sensor, Ultrasonic barrier Evaluation: digital Design: Thread Characteristics: IO-Link Parallel operation possible: No Functional scope Scope of delivery: Sensor, 2 x M18 nuts Functions: Teach (Pin 2), Out 1, IO-Link (Pin 4) Switching output: Push-pull, 150 mA, NO/NC, switchable Max. switch current: 150 mA Voltage drop (max.): 2 V Interface: IO-Link (V1.1, COM2 (38.4kBd) Smart Sensor Profile) Nominal switching distance (Sn): 800 mm Range: 80 … 800 mm Adjustment range: 80 … 800 mm (Teach in) Resolution: 1,0 mm (IO-Link) Standardized measuring plate: 200 x 200 mm Switching hysteresis (max.): 2 … 20 mm (Adjustable up to 20 mm via IO-Link) Reproducibility: 1 mm Sensitivity adjustment: Remote teach Display: LED 1x Green - Status, 1x yellow - Switching output Ultrasonic frequency: 200 kHz Switching frequency: 5,0 Hz Readiness delay (max.): 300 ms Ambient temperature during operation: -25 … +70 °C Temperature drift: 0,2 %/K (compensated) Temperature drift: 1 %/Sn (compensated) Protection type: IP 67 Connection: Connector, M12, 4-pin Accessories Connection cable: VKHM … /4