Manufacturer
AirCom Pneumatic
Part number
R200-08I
Country
Germany
Weight (g)
3000
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The volume booster amplifies the volume at a 1 to 1 ratio of
pilot pressure to outlet pressure.
The pilot pressure has no constant bleed. The bias spring at
booster R200 generates a positive shift of the pressure range
between pilot pressure and outlet pressure.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 17 bar
Pilot_pressure: max. 10 bar
Pilot_port: G1/4
Accuracy: at supply pressure variation of 7 bar = < 20 mbar pressure deviation
Response_sensitivity: 30 mbar
Air_consumption: without constant bleed
Relieving_function: relieving, optionally non-relieving
Relief_capacity:
1800 l/min at 0.3 bar overpressure above setpoint
Gauge_port: G1/4 on both sides of the body
Mounting_position: any
Temperature_range:
0 °C to 90 °C / 32 °F to 194 °F,
for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: aluminium die-cast
Elastomer: NBR/Buna-N on Dacron, optionally FKM
Inner_valve: stainless steel, cadmium-plated steel and brass
pilot pressure to outlet pressure.
The pilot pressure has no constant bleed. The bias spring at
booster R200 generates a positive shift of the pressure range
between pilot pressure and outlet pressure.
Media: compressed air or non-corrosive gases
Supply_pressure: max. 17 bar
Pilot_pressure: max. 10 bar
Pilot_port: G1/4
Accuracy: at supply pressure variation of 7 bar = < 20 mbar pressure deviation
Response_sensitivity: 30 mbar
Air_consumption: without constant bleed
Relieving_function: relieving, optionally non-relieving
Relief_capacity:
1800 l/min at 0.3 bar overpressure above setpoint
Gauge_port: G1/4 on both sides of the body
Mounting_position: any
Temperature_range:
0 °C to 90 °C / 32 °F to 194 °F,
for appropriately conditioned compressed air down to -40 °C / -40 °F
Body: aluminium die-cast
Elastomer: NBR/Buna-N on Dacron, optionally FKM
Inner_valve: stainless steel, cadmium-plated steel and brass
