Manufacturer
AirCom Pneumatic
Part number
PT782-0400
Country
Germany
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The proportional valve translates a direct current or voltage
signal into a linear proportional pneumatic outlet signal. With
rapid response controls using low-powered piezo microelectronics,
flapper nozzle and solid state control circuit. The proportional
valve has internal electronic with an electrical feedback sensor
and is housed in NEMA4X (IP65) enclosure with six outlet ranges,
jumper selectable. Input and outlet ports on both ends of the body
simplify pneumatic piping.
Media: 5 µm filtered compressed air or non-corrosive gases
Supply_voltage:
7…30 V DC, 90 mW, required for 0…10 V setpoint input only,
with reverse voltage protection
Electrical_connector:
plug according to DIN 43650A, contact gap 18 mm, 3-pin,
with coupling socket 30 x 30 mm
Command_signal:
0 … 10 V/ 10 kΩ, 3-pin, 24 V DC supply voltage,
4 … 20 mA / 330 Ω, two-wire, min. 7 V DC on input
Failsafe: exhaust at power breakdown
Response_sensitivity: < 0.2% FS
Linearity: < 0.25% FS
Repeatability: < 0.1% FS
Hysteresis: < 0.1% FS at 0.2…0.5 bar, otherwise < 0.25% FS
Vibration_sensitivity: < 1% FS, for 10 g and 15 … 500 Hz
Adjustment:
Zero point = by 0.3 bar
Range = 40% FS
Mounting_position: any
Temperature_range: -40 °C to 70 °C / -40 °F to 158 °F
Protection_class: IP 65
Body: chromated aluminium
Elastomer: NBR/Buna-N
Nozzle: sapphire in nickel-plated brass plate
Inner_valve: stainless steel, brass, zinc-plated steel
signal into a linear proportional pneumatic outlet signal. With
rapid response controls using low-powered piezo microelectronics,
flapper nozzle and solid state control circuit. The proportional
valve has internal electronic with an electrical feedback sensor
and is housed in NEMA4X (IP65) enclosure with six outlet ranges,
jumper selectable. Input and outlet ports on both ends of the body
simplify pneumatic piping.
Media: 5 µm filtered compressed air or non-corrosive gases
Supply_voltage:
7…30 V DC, 90 mW, required for 0…10 V setpoint input only,
with reverse voltage protection
Electrical_connector:
plug according to DIN 43650A, contact gap 18 mm, 3-pin,
with coupling socket 30 x 30 mm
Command_signal:
0 … 10 V/ 10 kΩ, 3-pin, 24 V DC supply voltage,
4 … 20 mA / 330 Ω, two-wire, min. 7 V DC on input
Failsafe: exhaust at power breakdown
Response_sensitivity: < 0.2% FS
Linearity: < 0.25% FS
Repeatability: < 0.1% FS
Hysteresis: < 0.1% FS at 0.2…0.5 bar, otherwise < 0.25% FS
Vibration_sensitivity: < 1% FS, for 10 g and 15 … 500 Hz
Adjustment:
Zero point = by 0.3 bar
Range = 40% FS
Mounting_position: any
Temperature_range: -40 °C to 70 °C / -40 °F to 158 °F
Protection_class: IP 65
Body: chromated aluminium
Elastomer: NBR/Buna-N
Nozzle: sapphire in nickel-plated brass plate
Inner_valve: stainless steel, brass, zinc-plated steel
