Manufacturer
AirCom Pneumatic
Part number
PT600-0200
Country
Germany
Weight (g)
750
Sale of any product from the AirCom Pneumatic catalog at competitive prices
2technologie will help you choose and buy products and spare parts from AirCom Pneumatic (official website: www.aircom.net). We sell only certified goods and give an official guarantee from the manufacturer AirCom Pneumatic
The proportional pressure transducer translates a direct current
or voltage input signal into a proportional pneumatic outlet
signal. The valve uses proven moving coil and flapper nozzle
technology with a built-in pneumatic relay with slight
amplification and positive bias. Additional supply voltage is
not necessary. The device has to be protected against vibration.
Media: 5 µm filtered compressed air or non-corrosive gases
Supply_voltage: not required
Electrical_connector:
plug according to DIN 43650A, contact gap 18 mm,
3-pin, with coupling socket 30 x 30 mm
Command_signal:
0 … 10 V / 1.1 kΩ at PT6..-B,
otherwise 900 Ω 4 … 20 mA / 200 Ω at PT6..-B, otherwise 260 Ω
Failsafe: exhaust at power breakdown
Response_sensitivity: < 0.2% FS
Linearity: < 0.5 % FS at 0.2…2 bar, otherwise < 1% FS
Repeatability: < 0.1% FS
Hysteresis: < 0.25% FS at 0.2…2 bar, otherwise < 1% FS
Vibration_sensitivity: < 2% FS, for 10 g and 15 … 500 Hz
Adjustment:
Zero_point = by 0.3 bar
Range = 40% FS
Mounting_position: upright ± 15°
Temperature_range: -30 °C to 65 °C / -22 °F to 149 °F
Protection_class: IP 65
Body: chromated aluminium
Elastomer: NBR/Buna-N
Nozzle: sapphire in nickel-plated brass plate
Inner_valve: stainless steel, brass, zinc-plated steel
or voltage input signal into a proportional pneumatic outlet
signal. The valve uses proven moving coil and flapper nozzle
technology with a built-in pneumatic relay with slight
amplification and positive bias. Additional supply voltage is
not necessary. The device has to be protected against vibration.
Media: 5 µm filtered compressed air or non-corrosive gases
Supply_voltage: not required
Electrical_connector:
plug according to DIN 43650A, contact gap 18 mm,
3-pin, with coupling socket 30 x 30 mm
Command_signal:
0 … 10 V / 1.1 kΩ at PT6..-B,
otherwise 900 Ω 4 … 20 mA / 200 Ω at PT6..-B, otherwise 260 Ω
Failsafe: exhaust at power breakdown
Response_sensitivity: < 0.2% FS
Linearity: < 0.5 % FS at 0.2…2 bar, otherwise < 1% FS
Repeatability: < 0.1% FS
Hysteresis: < 0.25% FS at 0.2…2 bar, otherwise < 1% FS
Vibration_sensitivity: < 2% FS, for 10 g and 15 … 500 Hz
Adjustment:
Zero_point = by 0.3 bar
Range = 40% FS
Mounting_position: upright ± 15°
Temperature_range: -30 °C to 65 °C / -22 °F to 149 °F
Protection_class: IP 65
Body: chromated aluminium
Elastomer: NBR/Buna-N
Nozzle: sapphire in nickel-plated brass plate
Inner_valve: stainless steel, brass, zinc-plated steel
